Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
DIN Metric Fittings 5/6. Loosen nut and inspect cut. The wall of metal should cover approx. 80%-90% of the ring face thickness. It is possible to rotate the cutting ring in this position. Final Assembly 7. For final installation take the pre-assembled tube always with the coupling, in which it has been pre-assembled. Then, tighten the nut with the spanner, until a clear increase of force results. For final tightening, continue to tighten by another 1/4 turn. If possible, counter-hold the coupling by means of a spanner during final assembly. Repeated Assemblies In case a coupling shall be loosened and then be reassembled, again the nut has to be tightened, until a clear increase of force results. Repeated assemblies can be performed as frequently as desired on the tube connection. Please request our Assembly Poster for your workshop. Quantity-Production Assemblies If larger quantities of tubes have to be assembled, we recommend the utilization of: 8. DIN Manual Pre-Assembly Tools for vice assembly. The assembly procedure is the same as described under items 4-6. The manual pre-assembly tools are hardened and are toleranced within the optimum range so that efficient tube connections are always achieved. 9. DIN Pre-Assembly Device for electrical drive (400 volts). Detailed assembly instructions are available upon request.
Goodyear Rubber Products
