![Show Menu](styles/mobile-menu.png)
![Page Background](./../common/page-substrates/page0033.jpg)
Multi-Rib V-Belts - J, L, M
Where a broad range of speed ratios (up to 60:1) is required, Multi-Rib V-belts are often
recommended. Belt turnover is eliminated. Additionally, Multi-Rib V-belts offer greater flexibility
than banded V-belts for smaller pulley diameters and more compact drives. Greater belt rib to
pulley groove contact gives more power transmission in less space. Multi-Rib V-belts are also
available in polyurethane construction on special order. For K section automotive and other sizes not listed,
consult Jason/Megadyne. Multi-Rib V-belts conform to ARPM Engineering Standard IP-26 and ISO 9982.
Multi-Rib V-belts are specified by the
effective length
in inches multiplied by 10, the cross section and the number of
ribs -
Example: 445J6
445J6
445 =
44.5 inch Effective Length
J =
0.092" - Rib width
6 =
Number of ribs
PART NUMBER DESIGNATION
THICKNESS
RIB
WIDTH
l l l l l l l
Nominal Belt Maximum Effective
Belt Rib Thickness No. of Length Length
Type Width (in.) (in.) Ribs Designation (in.)
J
0.092 .138 190 80J thru 980J 8 thru 98
L
0.185 .276 100 375L thru 2400L 37.5 thru 240
M
0.370 .472 46 900M thru 6600M 90 thru 660
Features & Benefits
l
High Flexibility
- Runs on small diameter pulleys, speed ratios up to 60:1
l
Multiple Rib Construction
- Eliminates turnover, one belt per drive, reduced noise and vibration
l
Polyester Tensile Cord
- High power capacity, low stretch
l
Fiber Reinforced Back
- Lateral stiffness
l
Multiple Profiles
- Wide range of power - design powers up to 800 HP
Construction
Compound
- Polybutadiene
Tensile Cord
- Polyester
Applications -
To be used in most classical, wedge, or FHP applications where the most compact and reliable
drives are needed
Engineering Standards -
Conforms to ARPM standard IP-26 and ISO 9982
Recommended Pulleys -
Use pulleys made to ARPM/ISO standards
Special Constructions -
Additional Cover Rubber (Max. 1/8")
Ground Top or Ribs (Max. 10" Width)
Non-Marking
Flexonic® -
Special construction elastic Multi-Rib belts now available for OEM applications. No take-up or idlers
required. Custom-designed for your fixed center drives. Consult Jason/Megadyne Engineering for details.
MULTI-RIB V-BELTS
POWERING GLOBAL INDUSTRY
MULTI-RIB V-BELTS
31