![Show Menu](styles/mobile-menu.png)
![Page Background](./../common/page-substrates/page0028.jpg)
28
www.flexco.com• phone: 1-630-971-0150
P R O D U C T H A N D B O O K
Applications
Installation Method WhatYou Need
for Installation
• Commercial Laundries
Clipper Patch Fastener Hooks can
be installed with the Pro 120 on-site
maintenance lacer or the Pro 150
production lacer.
• Patch Fastener Hooks
• Connecting Pin
• Installation Tool
How to Specify the
Correct Clipper
®
Fastener
Fastener Metal
Selection
Hinge Pin Selection
1. Measure your Belt Thickness.
2. Measure the Diameter of the
Smallest Pulley in your Drive with
Belt Wrap more than 90°.
3. Choose the fastener width that is
appropriate for your specifications.
Galvanized Steel.
For basic applications, galvanized
steel is recommended.
Stainless Steel.
Type 316 Stainless Steel offers more
resistance than galvanized steel to
abrasion, acids, chemicals, rusting,
and magnetic attraction.
CP Corrugated Perlon.
Fastener and Pin Size Selection Chart
Minimum Pulley
Diameter
Wire Diameter
Connecting Pin
Size
Belt
Thickness
in.
mm in.
mm
.078"
(2.0 mm)
15/16" (25 mm)
.024
0.62
.055
1.40
25SP
How Clipper
®
Patch Fastener Hooks Work
Clipper
®
Laundry Patch Fasteners are
manufactured from double-flattened wire
which increases the holding ability as well as
the transverse stability of the individual hooks,
providing a flat and even splice area. The
hook points are horizontally-cut, ensuring that
they are bent accurately down towards the
belt edge, which is especially important for
thin belts used in laundry feeder and folding
machine applications.
Available in either galvanized or 316L stainless
steel, the hooks are integrated into the
polyester patch material and are pre-cut to
belt widths with leading and trailing ends.
The patch is available with a custom logo if
desired. Corrugated Perlon hinge pins are
included with each box of fasteners, are
corrosion-free, and provide lubrication to the
splice joint.
Clipper
®
Patch Fastener Hooks