85 / 360
2015 Power Transmission Products
V-Belt
84
Part Number: B75
B
0.66 in. top width – Classical profile
75
Approximate 75 in. inside length
Vytacord® provides the high-strength, high-horsepower rating
capacity needed to effectively transmit today’s drive power. It is
even tough enough to tolerate slight sheave misalignment that
would quickly destroy ordinary belts.
The Vytacord® tensile member provides dimensional stability.
As a result, each belt of a given size will maintain its length
consistency, no matter when or where it was produced.
The exceptional dimensional stability properties of HY-T® Plus
eliminates matching problems, improves performance and
increases service life.
Improved materials are the key to the
durability and versatility of HY-T® Plus
The vast improvements in all components of HY-T® Plus
construction complement the quality of the Vytacord®
tensile member.
Our engineered heat- and oil-resistant rubber compound is
used in both the cushion and insulation sections of HY-T® Plus.
Belt construction provides the flexibility on small pulleys. As a
result the belt is able to serve a dual purpose for both Classical
and FHP, while offering more versatility than any other
Classical belt.
The HY-T® Plus envelope construction assures optimum warp
and fill thread angle, providing belt flexibility. In addition, the
fabric is treated with Continental ContiTech exclusive
engineered rubber compound for long wear and resistance to
heat, oil and other environmental hazards. The envelope also
assures that the belt dissipates static electricity, as specified in
ARPM bulletin IP3-3.
The cushion is also crush-resistant and cool running to maintain
its shape, fit and strength longer. And with the longer service
life achieved by HY-T® Plus belts, replacement of belts is less
frequent. Overall, belt costs are reduced, downtime is
minimized and equipment productivity is maintained.
Less inventory required
The HY-T® Plus can be used in FHP applications.
Conversely, rarely do FHP belts perform in HY-T® Plus
(Classical) applications.
The result is a reduced inventory that equates to dollars taken
off the shelves and into your pockets.
Applications
Designed for operating at high speeds over small diameter
pulleys and short center distances. Also for use in multiple
V-belt drives where high shock load and heavy-duty loads
are encountered.
Key features & benefits
›
Universal Classical profile.
›
High-strength Vytacord® tensile members.
›
Engineered rubber-impregnated envelope.
›
Engineered rubber compound cushion and insulation.
›
Dual branded (Classical and FHP part numbers).
›
Oil, heat, ozone and abrasion resistant.
›
Matchmaker® to eliminate mismatch.
›
Static conductive.*
To learn more, visit
www.contitech.us.
*Drive conditions and service variables in combination with time in
operation can result in a loss of static conductivity. It is recommended
that a conductivity check be added to drive preventive maintenance
programs where belt static conductivity is a requirement.
HY-T
®
Plus (Classical) Belts
Less elongation is the key
to performance
Whether you are talking about rubber belts or metal chains,
most materials will elongate when put to use. The secret to
reliable performance is not to eliminate elongation, but to
control it so that it is minimal, predictable and uniform. To
achieve these criteria, we developed the Vytacord®
tensile member.
Overview
Synchronous
Banded
V-Belt
Bushing Hardware
Specialty
Automotive & Truck
General Information