327 / 360
2015 Power Transmission Products
Specialty
146
Part Number: Flat “L” belt
Continental ContiTech Flat Cord transmission belts are made
with a single-layer, reinforcing section for a cross section which
is thinner by 25% or more compared to plied belts of equal
horsepower capacity. The high-tensile strength, multistrand
synthetic cords used in Flat Cord belts provide maximum
strength and minimum elongation.
Flat belts are furnished in an abrasion-resistant rubber
construction. They can be made with oil-resisting synthetic
rubber compounds on special order in widths from 1 to 36
inches and lengths from 25 inches to 135 feet.
Truly Endless Flat 250 and 450 Steel
Cable belts
These belts are constructed with steel cable for heavy-duty
drives. These belts include the features of Flat Cord belts with
the added advantage that the load-carrying members are very
finely stranded steel cables instead of synthetic rope cords. All
Flat 250 and 450 belts are made with oil-resisting compounds
throughout, which gives them greatly increased life under
operating conditions where oil is present.
They generally handle much higher horsepower loads than any
conventional fabric or cord construction belt, are extremely
flexible and readily conform to small pulleys.
Truly Endless Multiple Ply belts
The Multiple Ply belt is another product in the Truly Endless
line. The round-and-round fabric construction can be split into
multiple belts from one slab, representing great cost savings.
Various carcass materials are available for multiple ply belts,
depending on the application. The most highly recommended
are polyester/nylon, cotton, nylon, polyester, etc. These belts
can be supplied with rubber covers, friction surface or
bareback. We can supply V-guides, banner edges, cleats,
drive lugs and rough top surfaces.
Applications
Handles a wide range of horsepower and speeds in both
industrial and agricultural drives.
›
Harvesting equipment
›
Soil handling
›
Textiles and forestry
›
Food processing
›
Hay equipment
›
Chain replacement
›
Industrial equipment
›
Health and fitness
›
Direct gear
›
Material handling
Drive replacement
Key features & benefits
›
Smooth, quiet operation and long belt life.
›
Uniform belt surface with no splicing.
›
High-tensile strength.
›
High coefficient of friction.
›
Lightweight.
›
No lubrication necessary.
›
Transverse rigidity.
We manufacture a complete line of Flat belting from Truly
Endless and Multiple Ply belts to Regulator Power Strap Flat
belts for the health and fitness industry.
To learn more, visit
www.contitech.us.
Flat Belting (Truly Endless)
Truly Endless synthetic cord belts
These belts are extremely flexible and exceptionally long-lasting,
even when operating over small pulleys. They are made in
four different weights to meet any service requirement.
Overview
Synchronous
Banded
V-Belt
Bushing Hardware
Specialty
Automotive & Truck
General Information