286 / 360
2015 Power Transmission Products
V-Belt
105
To learn more, visit
www.contitech.us.
*Drive conditions and service variables in combination with time in
operation can result in a loss of static conductivity. It is recommended
that a conductivity check be added to drive preventive maintenance
programs where belt static conductivity is a requirement.
Open End V-belting will operate in any drive as long as
ARPM standard sheave dimensions are observed and the
recommended maximum speed of 3,500 feet per minute is not
exceeded. It is not recommended as a permanent substitute for
endless V-belts except on drives where standard belts cannot
be installed.
Horsepower ratings
The horsepower ratings for fastened Open End V-belts are
approximately 30% of published horsepower ratings for
Continental ContiTech standard multiple V-belts.
Note: Because of differences in the elongation characteristics and
variations in cross section dimensions, Open End V-belts and
Endless V-belts should not be used together on multiple drives.
Applications
Ideal solution for temporary replacement in emergency
situations or for long center drives. They can be used on all
types of industrial applications.
Key features & benefits
›
Universal Classical profile.
›
Multiple-ply, square-woven fabric tension members.
›
Oil, heat, ozone and abrasion resistant.
›
Easy installation with spliced ends.
›
Static conductive.*
Part Number: B-Open End
B
0.66 in. top width – Classical profile
Available roll lengths (see
chart below)
Open End V-Belting
The ideal solution for
problem applications and
emergency replacements
Continental ContiTech Open End V-belting is the perfect
answer for applications where endless V-belts are difficult
or impossible to install. It also serves as an ideal emergency
replacement when the exact length of endless belt is not
readily available
Regular Construction
A Section
B Section
C Section
D Section
Roll Lot: Either 250 ft. (maximum 2 pieces) or 500 ft. (maximum 3 pieces) approximate
rolls. “D” section available only in 250 ft. (maximum 2 pieces) approximate rolls.
General Information
Automotive & Truck
Specialty
Bushing Hardware
V-Belt
Banded
Synchronous
Overview