21 / 360
20
2015 Power Transmission Products
Synchronous
›
Size for size convenience (example: 8GTR-640-21=Gates
8MGT®-640-21*)
›
Static conductive**
›
Reduced operating noise levels to comparable belt drives
›
Exceptional tensile strength for premium performance
›
Rubber construction provides better resistance to flex fatigue
›
Versatility in a wide range of operating temperatures
Conditions: 14mm pitch belt, 20mm width belt,
32 tooth sprockets
*Contact customer service for availability. Gates, Poly Chain and GT are
trademarks of the Gates Corporation.
**Drive conditions and service variables in combination with time in
operation can result in a loss of static conductivity. It is recommended
that a conductivity check be added to drive preventive maintenance
programs where belt static conductivity is a requirement.
Specialty compounded materials give this
belt superior advantages
The ability to operate continuously in temperatures up to 2100F
(98.90C) and withstand peak temperatures as high as 3000F
(148.90C), along with being static conductive, help Falcon Pd®
perform in special applications, providing longer life and higher
output to meet your needs.
Lower maintenance costs reduce the pain
Falcon Pd® synchronous belts do not require lubrication often
found in chain drive applications. High-modulus cord members
minimize the need for retensioning normally required in
standard V-belts, reducing your overall maintenance cost.
Quiet operation
Falcon Pd® runs quieter, up to 6dB in operation for a better
environment while offering advanced flex-fatigue resistance to
help extend belt life.
Applications
Any application where a chain drive could be used.
Can also be used with a backside idler when needed, allowing
for additional applications.
Suitable for high horsepower, low torque drives.
Key features & benefits
›
Increased horsepower rating up to 36%
›
Increased continuous operating temperature up to 2100F
(98.90C)
Part Number: 8GTR-640-12
8
8mm pitch length
GTR
Falcon Pd® belt
640
640mm pitch
12
12mm width
Falcon Pd
®
Belts
The star of our reinforced rubber
power transmission belt portfolio
Falcon Pd® is quickly setting the new standard in synchronous
drive system belting. When compared to conventional
polyurethane synchronous belts, the benefits of Falcon Pd®
become evident.
140
120
100
80
60
40
20
Low Speed
40 RPM
High Speed
1750 RPM
Power Rating Comparison
Relative Belt Power Rating
Falcon HTC®
Falcon Pd®
Overview
Synchronous
Banded
V-Belt
Bushing Hardware
Specialty
Automotive & Truck
General Information