87 / 961
Hose Coupling
Systems
B
85
DPL418
877.963.4966 •
dixonvalve.comB
Holedall™
Holedall
™
Coupling Machines
Rams, are powerful finely engineered machines designed specifically to externally swage and internally expand Holedall™
couplings by hydraulic pressure securely attaching Holedall™ couplings to hose. Since each ram generates all the hydraulic
pressure required to attach the Holedall™ coupling, one person can easily operate the equipment.
Features:
•
for internally expanded couplings only
•
can expand 1" through 3" steel fittings and 5/8" through 4"
brass Holedall™ Petroleum fittings
•
produces up to 10,000 PSI, for up to 15 tons of ram force
•
bench mounted model (optional stand available)
•
motor: ½ h.p., 115 volt, 60 cycle, single phase with foot
pedal
Features:
•
can externally swage ¼" through 4" ID hose and internally
expand 5/8" through 4" ID hose with proper equipment
•
produces up to 10,000 PSI of line pressure for up to 25 tons
of ram force
•
free standing model
•
high speed pump kit option is available
•
motor is ½ h.p., 115 volt 60 cycle, single phase with foot
pedal
Features:
•
can externally swage 1¼" through 6" ID hose and internally
expand 1" through 6" ID hose with proper equipment
•
produces up to 10,000 PSI, for up to 50 tons of ram force
•
bench mounted model (optional stand available)
•
motor is1⅛ h.p., 115 volt, 60 cycle, single phase, standard
with remote, (220/440 volt motors are available)
Features:
•
for externally swaging Holedall™ fittings to hose, sizes 1¼"
through 10" ID
•
optional accessories allow the ram to be used for internally
expanded couplings on hose from 1" through 6"
•
capable of producing up to 100 tons of ram force
•
motor: 1⅛ h.p., 115 volt, 60 cycle, single phase motor is
standard with remote, (220/440 volt motors are available)
Features:
•
for externally swaging Holedall™ and Rotary fittings
•
produces up to 354 tons of ram force for swaging
•
14" 150 lb. flange will fit through the bed plate
•
ram has 36" of stroke
•
motor: 12½ h.p., 230 volt, 60Hz, 3 phase motor is standard
with remote
15 Ton Ram
25 Ton Ram
50 Ton Ram
100 Ton Ram
350 Ton Ram
All Rams require dies of the proper size to reduce the
ferrule to the proper diameter for a good grip on the
hose. Pushers of the proper size must be used on the
end of the Ram to push the Holedall™ fitting through the die.
Die and pusher selection depends on the sizes and types of
hoses being coupled. Ferrule recommendations are available
upon request. Consult Dixon
®
for specific details.