232 / 961
Industrial Hose
Fittings
D
230
DPL418
877.963.4966 •
dixonvalve.comD
Push-On Fittings Tool
Hose Barbs & Inserts
Features:
•
cuts push-on style hose and inserts the fitting
•
Built-in cutter slices through ¼" - ¾" ID reinforced push-on hose without fraying.
•
Clamp hose into tools vice and apply light pressure on handle to drive in the fitting.
•
tool has four 7/16" diameter mounting holes for bench mounting
•
overall size is 13½" long x 2⅜" wide x 7" height
Installation Instructions:
1. To cut your hose, retract the handle, place the hose in the cutter area and pull the handle.
2. After cutting the hose to the desired length, place the hose under the cam handle locking it
in place with the hose end aligned with the appropriate mark on the label.
3. Place the barbed end of the fitting against the end of the hose and then pull the handle
forward to complete the installation.
Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in,
with the cut end of the hose completely concealed by the plastic cap.
Size
Part #
¼" - ¾"
270AT
Yellow Lok-on Caps
Hose Assembly Tool
•
installs ¼", 5/16" and ⅜" hose fittings
•
lightweight, portable, comfortable cushioned grip
•
economical
Part #
HHCI
•
Sold in package quantities only.
Hose ID
Plastic
Part #
Pkg Qty
1/4"
2720400W
100
5/16"
2720500W
100
3/8"
2720600W
100
1/2"
2720800W
100
5/8"
2721000W
50
3/4"
2721200W
50
1"
2721600W
25
•
intended for use with Lok-On (push-on style) hose only
•
No hose clamps or ferrules are needed for installation
•
Properly grips push-on hose only when pushed all the way in, with the cut end of the
hose completely concealed by the plastic cap.