437 / 932
Holedall™ Fittings
435
DPL116
877.963.4966 •
dixonvalve.comM
Recommended Working Pressures
Holedall™ couplings, regardless of coupling style, are never to be used for steam service at any pressure.
Holedall™ fittings listed below are not to be used with cable reinforced high-pressure hose, 4 or 6 braid
wire hydraulic hose or any other service not listed in recommendations. In addition, Internally Expanded
Holedall™ couplings are not to be used with plastic lined chemical hose. Consult Dixon™ for recommendations on usage.
Holedall™ couplings (Externally Swaged), to perform satisfactorily, must be applied properly in accordance with Dixon™'s
assembly procedures, using the correct die and ferrule for that particular hose end OD. Dixon™'s Die and Ferrule
Recommendation Guide is to be used to select correct dies and ferrules. If you do not have the updated Die and Ferrule
Recommendation Guide, consult Dixon™. Strict adherence to ferrule OD range (Internally Expanded) for each hose end to be
assembled is essential for satisfactory performance.
Note: Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working
pressure for the fitting (reference chart below)
*
. Media being transported through the hose should be compatible with the
stem material. Compatibility of ferrule material with the environment in which it will be used is recommended. Consult these
Compatibility Chart on pages 818-823 or contact Dixon™ for material compatibility. For applications other than the ones listed,
please consult Dixon™.
Standard Fittings
Recommended for use on most one and two wire braid reinforced hoses, fiber reinforced (braided or spiraled) with or without
helical wire such as: oil suction and discharge hose, barge and dock loading and unloading hose as well as LP gas hose,
anhydrous ammonia hose, acid chemical hose and high pressure air and water hose.
Long Style Fittings
Recommended for use on hose as listed under standard fittings where additional retention is required due to higher working
pressures or end pull. Consult maximum working pressure chart or call Dixon™.
Holedall™ II Fittings
Recommended for Royalflex 1193 and 1196 hose or hoses with similar construction, having helical wire for a given OD range.
Light Duty Fittings
Recommended for use in the same applications as standard fittings above where lower working pressures are encountered.
Consult maximum working pressure chart or consult Dixon™.
Internally Expanded Fittings
Recommended for concrete placement, grout and plaster, food, dairy, pharmaceutical as well as other applications where
increased flow capacity is important. Consult maximum working pressure chart or call Dixon™ for additional application and
working pressure information.
* The assembly's (hose + coupling) maximum working pressure is the lesser of:
1) The hose rated working pressure, or
2) The coupling rated working pressure
** For hoses which use IXF48-3 to IXF48-5 and IXF64-2 to IXF64-5, consult Dixon™ for working pressures.
See notes below for specific recommendations.
***Contact Dixon™ for pressure reccomendations
1
maximum recommended working pressures, in PSI, given at
70°F
ambient temperature
Externally Swaged
Internally Expanded
Size
Standard
Fittings
1
Long Style
Fittings
1
Light Duty Fittings
Holedall™ II
Fittings
1
Cam and
Groove
1
Holedall™
DIN Crimp
Stems
1
Internally
Expanded
1
Flow Chief /
Crimp
Sanitary
Fittings
1
NO Notched
Fittings
1
NOS
Notched
Short Fittings
1
TM, TP, TG,
TMR, TPR,
TGR
TML, TPL,
TGL
TM, TP, TG,
RN•••NO
RST•••NOS,
STC•••NOS,
GAS••••NOS
FW
HA••••
IXM, IXV,
IXH
IXSE, IXFS,
IXMS, CSSR
¾"
---
---
---
---
---
---
---
---
---
1"
---
---
---
---
---
250
---
---
---
1¼"
600
1,000
350
---
---
---
---
800
---
1⅜"
---
---
---
---
---
---
---
---
---
1½"
600
1,000
350
250
300
250
145
800
250
2"
600
1,000
350
250
300
250
145
800
250
2½"
600
1,000
250
---
250
150
---
600
250
3"
600
1,000
250
250
200
125
145
600**
250
4"
500
850
250
***
200
100
---
500**
200
5"
450
750
---
---
---
---
---
---
---
6"
400
700
---
---
---
---
---
400
---
8"
350
600
---
---
---
---
---
---
---
10"
300
550
---
---
---
---
---
---
---