227 / 932
Air Fittings
225
DPL116
877.963.4966 •
dixonvalve.comF
with metal bowl
Wilkerson Lubricators
SCFM ratings at 150 PSIG inlet pressure.
Features:
•
4.09 oz. bowl
•
manual drain
•
high flow capacity
•
can be filled under pressure
•
To adjust and set oil delivery rate the unit must be
pressurized and air must be flowing through the unit. Turn
the sight dome, located on the top of the unit, counter
clockwise to initiate oil delivery. The rate of oil delivery
depends on air flow rate. If flow increases or decreases,
the oil delivery rate will increase or decrease proportionally.
Turning the sight dome clockwise will stop all oil delivery.
•
maximum operating conditions:
- transparent bowl:
150 PSIG
(10.3 bar) and
32°F
to
125°F
(0°C to 52°C)
- metal bowl:
250 PSIG
(17.2 bar) and
32°F
to
150°F
(0°C to 65.5°C)
Features:
•
10 oz. bowl
•
adjustable oil feed
•
can be filled under pressure
•
quick-disconnect metal bowl guard with integral safety latch
•
siphon tube filter provides clean lubricant downstream
•
The rate of oil delivery may be controlled by turning the
adjusting screw counter clockwise for more and clockwise
for less oil delivery. If flow increases or decreases, the oil
delivery rate will increase or decrease proportionally.
•
maximum operating conditions:
- transparent bowl:
150 PSIG
(10.3 bar) and
32°F
to
125°F
(0°C to 52°C)
- metal bowl:
200 PSIG
(13.8 bar) and
32°F
to
150°F
(0°C to 65.5°C)
Flow Guide
®
The elastomer disc-shaped device is located in the throat of all Wilkerson lubricators and automatically maintains a constant ratio
of oil flow to airflow regardless of changing rates of airflow. This allows one lubricator to serve several pneumatic components
operating together or intermittently.
Type of oil to use:
For all Wilkerson lubricators, use any petroleum-base, non-detergent light weight oil (SAE 10/150SSU) which will readily break
up into a mist, i.e., Mobil DTE light or comparable oil. Do not use synthetic oil or any oils containing additives or solvents. See
page 156 for air tool lubricants.
See pages 239-241 for lubricator accessories. See page 156 for air tool lubricant.
1
metal bowl has sight gauge with brass petcock drain
Wilkerson EconOmist
®
Standard Lubricators
Wilkerson EconOmist
®
Compact Lubricators
Size Flow
(SCFM)
With Transparent Bowl
With Metal Bowl
Part #
Price/E
Part #
Price/E
¼"
88
L18-02A
$117.50
L18-02AMB
$128.30
⅜"
90
L18-03A
117.50
L18-03AMB
128.30
½"
96
L18-04A
117.50
L18-04AMB
128.30
Size Flow
(SCFM)
With Transparent Bowl
With Metal Bowl
1
Part #
Price/E
Part #
Price/E
¼"
35
L26-02A
$189.35
L26-02AMB
$208.70
⅜"
60
L26-03A
189.35
L26-03AMB
208.70
½"
128
L26-04A
189.35
L26-04AMB
208.70
FRL's are designed for air service only, unless otherwise indicated.
with metal bowl
1.60 (41)
Bowl Removal
Clearance
8.66 (220)
2.31 (59)
2.36 (60)