20 / 68
18
Dixon Brass 2016
800.323.4440
270AT Hose Fitting Installation Tool
Features:
• Cuts push-on style hose and inserts the fitting
• Built-in cutter slices through 1/4" - 3/4" I.D. reinforced push-on
hose without fraying
• Clamp hose into tool's vice and apply light pressure on handle
to drive in the fitting
• Tool has four 7/16" diameter mounting holes for bench
mounting
• Overall size is 13-1/2" long x 2-3/8" wide x 7" height
Lok-on Hose Fittings
Assembly Instructions
1. Trim hose end with a smooth square cut.
2. Lubricate either push-on fitting, hose or both.
3. Insert push-on fitting into hose until first barb is in the hose.
4. Place end of fitting against a flat object (bench, wall, etc.) and
grip the hose one inch from the end. Push with a steady force
until the end of the hose is covered by the yellow plastic cap.
Disassembly Instructions
1. Leaving push-on fitting in place, make a 1" cut in the hose
along the barbed end of the fitting. Note: Be careful not to
nick barbs when cutting the hose.
2. With firm grip on hose, give a sharp downward pull to release
the fitting from the hose
• CAUTION: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose
completely concealed by the plastic cap.
271 Series
Note: Swivel for assembly convenience only, not for live swivel applications,
120 maximum PSI
NPTF-MALE
SWIVEL HOSE BARB
National Pipe Tapered - Dryseal
Part Number
Hose ID
A
NPTF Thread
B
Length
C
Hex
No. of
Barbs
Barb Length
D
Std.
Pkg.
Lbs. per
100 pcs.
271
0402C
1/4
1/8-27
2.09
9/16
2
.81
100
6.8
271
0404C
1/4-18
2.02
9/16
2
.87
100
6.1
271
0604C
3/8
1/4-18
2.12
9/16
2
.97
50
7.4
271
0606C
3/8-18
2.12
11/16
2
.97
50
9.1
271
0806C
1/2
3/8-18
2.12
11/16
2
.97
25
10.4
271
0808C
1/2-14
2.33
7/8
2
.97
20
14.8
271
1212C
3/4
3/4-14
2.80
1-1/16
3
1.45
10
24.8
Lok-on Hose Fittings
Part Number
Description
270AT-RPLBlade
Replacement blade for the 270AT