![Show Menu](styles/mobile-menu.png)
![Page Background](./../common/page-substrates/page0223.jpg)
221
Dixon Sanitary 2016
800.789.1718
Check Valves
V
Air Relief Valves
Product Specifications
Features:
•
3A Standards 58-00 with Elbow Extension, Check Valves
and Vacuum Breakers
•
no special tools required
•
ball and gaskets are replaceable
•
The valve seals for both pressure and vacuum.
•
All product contact surfaces have a radius of ¼" or better.
•
The valve ball is constructed of FDA, 3A approved
polypropylene.
•
PTFE valve ball is available
•
other gasket materials available
•
maximum operating temperature:
212°F
•
maximum PSI:
145
Applications
1.
Bleeding of a line where an air pocket has formed. This
application calls for installation at the top of the line.
2.
Bleeding of a tube on the suction side of a pump. The
suction side is bled automatically, before the pump starts,
establishing a vacuum. Binding of air to liquid will be
prevented, and so will subsequent cavitation. In this
application the valve is mounted in front of the pump, on
the top of the inlet tube.
Working Principle
The Dixon Sanitary air relief valve allows air to be removed
from a line or container without the liquid flowing out. Its
design does not allow air to enter the line or container, even
if subjected to a negative pressure. It is a double-seated
valve with a freely moving polypropylene ball. The ball, which
is lighter than water, closes against the upper or lower seat,
depending on the pressure conditions.
Description
A
B
C D E
F
G H J
304 Stainless Steel
Part Number
1½" air relief valve
with tapped blind end
1.98 1.40 1.50 ---
2.40 ---
---
---
⅛" NPT
BARV-G150
2" air relief valve with
tapped blind end
2.51 1.40 1.50 ---
2.40 ---
---
---
⅛" NPT
BARV-G200
1½" air relief valve
with 180° elbow
1.98 1.40 ---
1.50 ---
0.37 4.50 1.10 ---
BARVE-G150
2" air relief valve with
180° elbow
2.51 1.40 ---
1.50 ---
0.37 4.50 1.10 ---
BARVE-G200
1447
58-00
All dimensions are in inches unless otherwise noted. Engineering dimensions are available upon request.
Specifications are subject to change without notice.