74-75 / 114
DRUM PULLEY
High-strength steel-faced pulleys: available with rubber lagging for improved traction.
WING PULLEY
Self-cleaning angled gussets remove excessive build-up, improving the efficiency of
your conveyor system. Wing pulleys increase traction and reduce damage and abrasion
on both the belt and the pulleys. Not recommended for cleated belts.
REPLACEABLE LAGGING
Vulcanized rubber bonded to metal backing that can be fitted or welded to the pulley face.
VULCANIZED RUBBER LAGGING
60 durometer SBR, available in oil-resistant and MSHA. Wide variety of thicknesses and
grooving patterns available, such as herringbone, chevron, and diamond.
Cleaner/Scraper
Flat Idler
20-Degree
Troughing Idler
45-Degree
Troughing Idler
35-Degree
Troughing Idler
IDLERS AND CLEANERS
Troughing and return idlers are
available in a number of styles,
materials, and angles for any
conveyor application. Several
styles of continuous belt cleaners
are available to prevent material
build-up and reduce downtime.
PULLEY LAGGING
For this method of pulley lagging, a long strip of roughtop is spiralled around the pulley from end-to-end and
centered for good adhesion. The ends may be notched per sketch for neat application. Bolt or screw ends
intermittently throughout. Length of strip is calculated as follows:
L = Length (in.)
D = Diameter (in.)
π
= 3.1416
F = Face – width of pulley (in.)
W = Lagging width (in.)
L = D x
π
x F
W