Page 40 - Dixon Petroleum 2013_wm

800.355.1991 38 Dixon Bayco 2013
Overfill
Products
Overfill Products
FloTech Checkmate Overfill/Retain Plug-n-Play System Overfill Sensors
Fuel Tanker Overfill Detection
Features and Benefits:
•Overfill detection sensors are intended to detect a pending overfill condition inside the fuel tank compartment. When they are
wetted (come in contact with the fuel) they signal the fuel loading rack to close the fuel supply control valve, to prevent a spill
of product.
•Prewired and factory tested with Plug-n-Play cabling and plugs, eliminates hours of manual crimped wire connections, and
removes the problems and worries associated with connection problems. Easy to install, just mount the housing into the tank
and plug the cables together.
•Trouble Free Probes: FloTech brand probes incorporate a double elastomer design which seals and secures the sensitive
glass optic prism tip. The elastomer seals are flexible allowing thermal expansion and resistance to steam cleaning and
petroleum chemical attack.
•Custom lengths available upon request
•The FT151P series sensor housing contains a Plug-n-Play probe in a cast aluminum housing .The sensor housing has a 2"
NPT mounting thread, heavy duty stainless steel hardware, and Viton® probe seal. Install into either a 2" NPT threaded port or
a 2-3/8" diameter tank opening using the gasket and locking nut provided. All screws and rings are heavy duty stainless steel
for easy assembly and long life.
Part # Description
FT151P Housing with 7" Plug-n-Play overfill detection probe, with Plug-n-Play harness connector
FT151P-12 Housing with 12" Plug-n-Play overfill detection probe, with Plug-n-Play harness connector
FT151P-18 Housing with 18" Plug-n-Play overfill detection probe, with Plug-n-Play harness connector
See page 125 for repair kits and replacement parts.
Part # Description
FT150P Replacement 7" Plug-n-Play probe with Plug-n-Play harness connector
FT150P-12 Replacement 12" Plug-n-Play probe with Plug-n-Play harness connector
FT150P-18 Replacement 18" Plug-n-Play probe with Plug-n-Play harness connector
Replacement Probes
Retain Sensors
Features and Benefits:
•Retain sensors inform the loading terminal if the tank compartments are empty, or if there is product left in the tank prior to re-
loading the tank (product has been retained).
•Prewired and factory tested with Plug-n-Play cabling and plugs, eliminates hours of manual crimped wire connections, and
removes the problems and worries associated with connection problems. Easy to install, just mount the housing into the tank
and plug the cables together.
•Trouble Free Probes: FloTech brand probes/sensors incorporate a double elastomer design which seals and secures the
sensitive optic prism tip. The elastomer seals are flexible allowing thermal expansion and resistance to steam cleaning and
petroleum chemical attack.
•The FT152 sensor is a bottom retain detection sensor. Sensor is shipped with a ½" NPT weld-on aluminum half coupling
for mounting. The main sensor portion is stainless steel to prevent galling in the tank. The wiring box is plastic to prevent
corrosion.
See page 126 for repair kits and replacement parts.
Product instruction sheets and technical data can be viewed on our website at dixonbayco.com by selecting the "Resources" menu
Biofuel Compatible
Part # Description
FT152P Housing with Plug-n-Play retain probe, with Plug-n-Play harness connector