Page 207 - DPL413 Complete Catalog for web_wm

Air Fittings
E
205 DPL413 877.963.4966 • dixonvalve.com
with metal bowl
with metal bowl
Wilkerson Lubricators
SCFM ratings at 150 PSIG inlet pressure.
Features:
• 4.09 oz. bowl
• manual drain
• high flow capacity
• can be filled under pressure
• To adjust and set oil delivery rate the unit must be
pressurized and air must be flowing through the unit. Turn
the sight dome, located on the top of the unit, counter
clockwise to initiate oil delivery. If flow increases or
decreases, the oil delivery rate will increase or decrease
proportionally. Turning the sight dome clockwise will stop all
oil delivery.
• maximum operating conditions:
transparent bowl: 150 PSIG (10.3 bar) and 32°F to 125°F
(0°C to 52°C)
metal bowl: 250 PSIG (17.2 bar) and 32°F to 150°F
(0°C to 65.5°C)
Features:
• 10 oz. bowl
• adjustable oil feed
• can be filled under pressure
• quick-disconnect metal bowl guard with integral safety latch
• siphon tube filter provides clean lubricant downstream
• The rate of oil delivery may be controlled by turning the
adjusting screw counter clockwise for more and clockwise
for less oil delivery. If flow increases or decreases, the oil
delivery rate will increase or decrease proportionally.
• maximum operating conditions:
transparent bowl: 150 PSIG (10.3 bar) and 32°F to 125°F
(0°C to 52°C)
metal bowl: 200 PSIG (13.8 bar) and 32°F to 150°F
(0°C to 65.5°C)
1.60 (41)
Bowl Removal
Clearance
8.66 (220)
2.31 (59)
2.36 (60)
Flow Guide®
The elastomer disc-shaped device is located in the throat of all Wilkerson lubricators and automatically maintains a constant ratio
of oil flow to airflow regardless of changing rates of airflow. This allows one lubricator to serve several pneumatic components
operating together or intermittently.
Type of oil to use:
For all Wilkerson lubricators, use any petroleum-base, non-detergent light weight oil (SAE 10/150SSU) which will readily break
up into a mist, i.e., Mobil DTE light or comparable oil. Do not use any synthetic oil or oils containing additives or solvents. See
page 136 for air tool lubricants.
See pages 218-220 for lubricator accessories. See page 136 for air tool lubricant.
* metal bowl has sight gauge with brass petcock drain
Wilkerson EconOmist® Standard Lubricators
Wilkerson EconOmist® Compact Lubricators
Size SCFM With Transparent Bowl With Metal Bowl
Part # Price/E Part # Price/E
1/4" 88 L18-02A $114.05 L18-02AMB $128.30
3/8" 90 L18-03A 114.05 L18-03AMB 128.30
1/2" 96 L18-04A 114.05 L18-04AMB 128.30
Size SCFM With Transparent Bowl With Metal Bowl *
Part # Price/E Part # Price/E
1/4" 35 L26-02A $179.25 L26-02AMB $197.45
3/8" 60 L26-03A 179.25 L26-03AMB 197.45
1/2" 128 L26-04A 179.25 L26-04AMB 197.45
FRL's are designed for air service only, unless otherwise indicated.