Page 42 - ParkerQuickCouplingCatalog38002010

Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings A-39
Pneumatic Quick Couplings
A
Pneumatics
Accessories
Blow Guns (Controlled Pressure)
Description
410-S – Parker Controlled
Pressure Blow Guns
features thumb lever valve
actuator and brass nozzle.
Inlet port is 1/4" NPT.
410-SV – Parker Venturi
Nozzle Controlled Pressure
Blow Gun with thumb lever
valve and large venturi side
ports for high volume flow.
Inlet port is 1/4" NPT.
415-S – Parker Controlled
Pressure Blow Guns
features push button valve
actuator and brass nozzle.
Inlet port is 1/4" NPT.
The following Parker Blow Guns must have a pressure
regulator setting below 30 psi to conform to OSHA safety
requirements 29 CFR 1910.242 Paragraph b.
Accessories
Blow Guns (Full Pressure)
Description
410 – Parker two way thumb
lever valve has an zinc body
with 1/4" NPT inlet and 1/8"
NPSF outlet.
Note: Standard Gun without
nozzle.
410-N – Parker thumb lever
style Blow Gun features a
zinc body, brass nozzle, and
1/4" NPT female inlet.
415-N – Parker Blow Gun
features a push button style
actuator, zinc body with a
brass nozzle and 1/4" NPT
female inlet.
Specifications
Part Maximum Wt. (LB)
No. Pressure P/Piece
410-S 150 PSI. 0.50
410-SV 150 PSI 0.53
415-S 150 PSI 0.48
Features
• Parker Controlled Pressure Blow Guns meet OSHA
requirements (section 29 CFR 1910.242 paragraph b), and
directive #100-1. “Compressed air shall not be used for
cleaning purposes except where reduced to less than 30
psi, and then only with effective chip guarding and personal
protective equipment.”
• Parker Controlled Pressure Blow Guns have a black epoxy
coated zinc body and vented nozzles to prevent pressure
build-up when dead ending occurs up to 150 psi.
Part Maximum Wt. (LB)
No. Pressure P/Piece
410 150 PSI 0.48
410-N 150 PSI 0.51
415-N 150 PSI 0.49
Part No. 400-S-TIP
Blow Gun
Replacement Tip
Specifications