Diagnostic Products
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
F-27
F
Diagnostic
When ordering Parker coupler bodies and nipples, please
state the part number of each type of coupler body and each
type of nipple desired. List coupler bodies and nipples as
separate items rather than in combinations. Be sure to double
check thread or hose sizes of items required.
Many of Parker’s coupling products are available with unique
non-standard options well suited to very specific applications.
Examples of unusual end use applications might include:
high temperatures (above 250° F), extremely
caustic/corrosive solutions passing through the coupling,
external/environmental corrosion situations, or other high
wear and tear situations such as dragging the product along
the ground. Please see the Fluid Compatibility Chart at the
end of the catalog for a guide in selecting material for various
media. It is always recommended that the Quick Coupling
Division be contacted with any questions concerning specific
product application needs.
Typically, a prefix or suffix is added to the base part number to
specify a non-standard O-ring seal, or special option. The
Optional Seals Suffix chart illustrates the designations.
Please Note: Certain couplings series have additional
"Special Order Information" which should be referred to in
ordering those products. If applicable to the product, "Special
Order Information" is found next to the Features and
Specifications charts.
Coupler/Nipple Material
• Prefix “B” for Brass body
• Prefix “SS” for Stainless Steel body
• Standard body material is Steel
Optional Seals Suffix*
*To select proper seal materials, see Fluid Compatibility Chart in Appendices
section, or contact your Parker Quick Coupling Distributor.
**N/A = Not Available; STD = Standard (No Suffix Needed)
Ordering Information
Test Port Coupling-Selection Guide
Diagnostic Products
Note:
See the Specifications Table for PD and PDP Series for more information.
No suffix is required when ordering products with the
standard Nitrile seals. When specifying an optional seal,
refer to the following chart to determine the appropriate
suffix.**
Coupling Series Ethylene Fluoro- Neoprene Perfluoro-
Propylene carbon
elastomer
PD Series
W Y
Z
PDP Series
W Y
Z
Valving
Body Material*
Locking
Std. Seal
Temp
Rated
Size Br SS S P Mechanism Material
Range**
Pressure
Test Port
PD Series
Flush Face
1/8"
• • •
Ball
Nitrile
-40° to +250° F 6000 PSI
PDP Series
Ball
1/8"
•
Ball
Nitrile
-40° to +250° F 6000 PSI
EMA3 Series
Poppet
1/8"
• •
Threads Nitrile/Fluorocarbon -15° to +250° F 9000 PSI
* See Fluid Compatibility chart and/or consult factory for questions regarding proper material for specific applications.
CODE: Br = Brass; SS = Stainless Steel; S = Steel; P = Plastic
**Temperature Range for standard seal material.
SensoControl
®
diagnostic product’s technical information subject to change.