Page 257 - untitled

Parker Hannifin Corporation
Parflex Division
Ravenna, Ohio
251
Coiled Air Hose,
Fittings
& Accessories
Hydraulic &PneumaticHose & Fit.
PTFEHose &Fittings
The
rmoplasticTu
bing
Truck (Fleet)
Products
Tooling &Equipment
Hose
Accessories
Technical &
Design
Information
Approvals &
Guides
Alphanumeric
Index
SQ-Swage Instructions
INSPECT
FITTINGS 5
Verify fittingpart numbermatch-
es work order.
Visually inspectfittingforproper-
ly crimpedshells, internal barbs,
a through-hole and damage.
ASSEMBLE
HOSE 7
Mark hose at bottom of fitting
shell. (Mark indicates the full
length in which hose will be in-
serted into fitting.)
Using a SAE 20 lubricating oil,
lightly lubricate inside of both
hose ends.
ASSEMBLE
HOSE 9
SEWER HOSE
Mark each hose end with proper
insertion depth line as follows:
Place fitting next to hose and
align annular crosshatched ring
on fitting with end of hose.
ASSEMBLE
HOSE 6
ASSEMBLE
HOSE 8
Repeat Steps 4a and 4b for other
hose.
Push each hose end into fitting
all the way to depth insertion
mark.
NOTE
The following steps are per-
formed using the PSH-Swager
or SQ-101-SW.
NOTE
You must use 2 complete dies for
each size.
CAUTION
Make sure both die halves are
the same size and their serial
numbers match. Failure to do
so will result in an improperly
ASSEMBLE
HOSE 10
CONTINUED FROM PAGE 239