Page 247 - untitled

Parker Hannifin Corporation
Parflex Division
Ravenna, Ohio
241
Coiled Air Hose,
Fittings
& Accessories
Hydraulic &PneumaticHose & Fit.
PTFEHose &Fittings
The
rmoplasticTu
bing
Truck (Fleet)
Products
Tooling &Equipment
Hose
Accessories
Technical &
Design
Information
Approvals &
Guides
Alphanumeric
Index
ASSEMBLE
HOSE
HYBRID & THERMOPLASTIC
Using a rubber mallet, tap fitting
onto hose until bottom of fitting
shell is alignedwith depth inser-
tion mark. Repeat Steps 7-10 for
other end of hose if required.
NOTE
Thefollowingstepsareperformed
using the Parker Parkrimp I.
NOTE
Pusher slide pin is located inside
rear of pusher.
CAUTION
Do not use the black spacer ring
on Parflex fittings. Use of the
black spacer ring will result in
improperly crimped fittings and
hose assemblies.
Hose Assembly & Crimping
ALL HOSES
ASSEMBLE
HOSE 11
Select proper Parkrimp die set.
(Refer toAssemblyToolSelection
Chart in Catalog 4660 or 4690
for proper Parkrimp die part
number.)
ASSEMBLE
HOSE 12
Using a molybdenum disulfide
type grease, apply a thin layer of
grease on bowl of crimper base
plate.
ASSEMBLE
HOSE 15
Insert hose and fitting from bot-
tomof crimperandupthroughdie
set. Position fitting so bottom of
fitting skirt rests on die step.
ASSEMBLE
HOSE 13
Place die set into bowl.
CAUTION
The silver die ring must be used
for all Parflex fittings. Failure
to do so will result in improp-
erly crimped fittings and hose
assemblies.
ASSEMBLE
HOSE 14
Place silver die ring on top of die.
Position ring so it is centered
on die. CAUTION
When positioning fitting in die,
ensure fitting skirt rests on die
step. Failure to do so will result
inan improperlycrimpedordam-
aged fitting.
10