Page 245 - untitled

Parker Hannifin Corporation
Parflex Division
Ravenna, Ohio
239
Coiled Air Hose,
Fittings
& Accessories
Hydraulic &PneumaticHose & Fit.
PTFEHose &Fittings
The
rmoplasticTu
bing
Truck (Fleet)
Products
Tooling &Equipment
Hose
Accessories
Technical &
Design
Information
Approvals &
Guides
Alphanumeric
Index
WARNING:
Do not use lubricating oil when
installingfittingsonhoseused in
oxygen service. When installing
fittings on hose used in oxygen
service lubricate with a non-oil
based soap solution. Failure to
do so may result in an explosion
and personal injury when hose
is used.
INSPECT
HOSE 4 INSPECT
FITTINGS 5 ASSEMBLE
HOSE 6
Visually inspect both ends of
hose for squareness.. Remove
any burrs on core tube with a
sharp knife.
Visually inspectbothendsofhose
for squareness, loose wires and
burrs on core tube. Trim any
loose wires flush with tube and
remove any burrs on tube with a
sharp knife.
Verify fitting and ferrule part
number(s) match work order.
Verify fitting part number(s)
match work order.
Visually inspect fitting(s) for a
through-hole, threads and damage.
Verify fitting part number(s)
match work order.
Visually inspect fitting(s) for
a through-hole, threads and
damage.
PTFE HOSES
GPH HOSES
Markhoseendwithproper inser-
tion depth line as follows:
Place fitting next to hose and
align annular crosshatched ring
on fitting with end of hose.
Visually inspect both ends of
hose. Ensure end of hose is cut
squarely, has no loose or frayed
reinforcement and core tube
is not damaged. Trim hose as
required.
HYBRID & THERMOPLASTIC
Mark hose end with proper inser-
tion depth line. For 919U hoses,
use a sharp knife and light pres-
sure to cut back the urethane
cover at least the length of the
insertion depth of the fitting.
Hose Assembly & Crimping
HYD. FIELD ATTACHABLES:
For further instructiononHydraulicField
Attachableassembly, pleaseproceed to
page244 for steps 6 - 14.
SQ SWAGER ASSEMBLY:
For swaged Predator Hose assemblies
using the SQ-101 swager, please proceed
to page 251.
GPH HOSES:
Please proceed to page 240 for
continued instruction.
PTFE FIELD ATTACHABLES:
For further instruction on PTFE 90
Series Field Attachable assembly,
please proceed to page 246 for steps
6 - 25.