Page 66 - FluoropolymerHoseCatalog5162F

64
Permanent Fittings
HOSE ASSEMBLY & CRIMPING
Select proper Parkrimp die set.
(Reference Crimpsource online at www.
parker.com/crimpsource)
Using a premium, quality, lithium-base
grease, apply a thin layer of grease on
bowl of crimper base plate.
Crimp Die – Place die set into bowl.
Assemble hose – Insert hose and ftting from bottom of crimper and up through die set. Position ftting so
bottom of
While holding hose and ftting in position on die step, crimp ftting onto hose until die ring contacts base plate.
NOTE
4 Die Selection
6 Die & Spacer Ring
7 Crimp
5 Lubricate Bowl
Keep fngers and hands away from die-pusher area.
Failure to do so may result in personal injury.
WARNING
Die Ring – Place applicable die ring on top of die.
Position ring so it is centered on die.
Parfex hoses utilize silver die ring.
(Reference Crimpsource online at www.parker.com
/crimpsource)
ftting skirt rests on die step (PARKALIGN feature).
Pump on crimper should not exceed 3000 PSI. Parker
Hannifn will not accept responsibility for the operation
of or provide warranty coverage for a crimper that
is operated by a power unit other than equipment
supplied by Parker Hannifn for the express purpose of
operating the crimper.
Technical