Page 369 - MidlandMetalsCatalog2010baNN

368
H
YDRAULIC
MODEL # MGP-F20
• Aluminium construction.
• 8 Displacement sizes from 0.36 to 1.52 cu. in/rev.
• Mounting flange is SAE A-2 bolt.
• Ports are SAE-12 inlet and SAE-10 outlet.
• Drive shaft is a 5/8 inch diameter straight with 5/32 straight key.
Part # Displacement
cu.in/rev
PSI Speed RPM Weight
Lbs Rated Max
MGP-F20-06 0.36 3650 2000 3000 5.35 ----
MGP-F20-08 0.48 3650 2000 3000 5.61 ----
MGP-F20-10 0.61 3650 2000 3000 5.72 ----
MGP-F20-12 0.73 3650 2000 3000 5.91 ----
MGP-F20-14 0.85 3650 2000 3000 6.00 ----
MGP-F20-16 0.97 2900 2000 3000 6.27 ----
MGP-F20-20 1.22 2900 2000 3000 6.73 ----
MGP-F20-25 1.52 2900 2000 3000 7.19 ----
Recommended working conditions:
• Filtration 25 micron or better.
• Oil Viscosity 6 to 200 cSt.
• Inlet pressure 12 to 32 psi abs.
• Oil Temperature -25 to 55 degrees C (-12 to 175 F°).
• Ambient -22 to 55 C° (-8 to 130 F°).
INSTALLATION DATA
Part # A B
Millimeters Inches Millimeters Inches
MGP-F20-06 98 3.87 45 1.77
MGP-F20-08 100 3.95 47 1.85
MGP-F20-10 104 4.12 48 1.89
MGP-F20-12 108 4.25 50 1.97
Part # A B
Millimeters Inches Millimeters Inches
MGP-F20-14 110 4.35 51 2
MGP-F20-16 114 4.50 52.5 2.07
MGP-F20-20 120 4.72 56 2.2
MGP-F20-25 128 5.05 60 2.36
ACCESSORIES HYDRAULIC GEAR P UMP
ORDERING INFORMATION
MGP
Aluminum
Gear Pump
F20
High
Pressure
Series
16
Displacement
cm3/rev
(see chart)
06/08/10/12/14/16
20/25
P
Drive
Shaft
P-5/8 Dia
Straight
P1-3/4 Dia
Straight
S9-Spline 9 tooth
C
Rotation
Direction
C-Clockwise
A-Counter Clockwise
(viewed from drive shaft
end)