Page 64-65 - LT_3722_v8_MRO.qxp

HOSE ENDS – AIR & HYDRAULIC
THREAD SEALING
11
LOCTITE® BRAND THREAD SEALANT QUICK SELECTOR (TAPERED THREADS)
Instant Max. Steam Temp.
Application Product Primer Seal Pressure Pressure Range
Stainless Steel 567™ PST® Pimer N™ 500 psi 10,000 psi 235 psi -65°F to
and All Other Thread Sealant (24 hours) +400°F
Metal Fittings
Most Metal 565™ or 561™ Primer N™ 500 psi 10,000 psi n/a -65°F to
Fittings Except PST® Pipe (24 hours) +300°F
Stainless Steel Sealant
High Filtration/ 545™ Thread Primer N™ 500 psi 10,000 psi n/a -65°F to
Zero Contamination Sealant – (10 min.) (24 hours) +300°F
Systems Hydraulic/Pneumatic
Stainless Steel 564™ Thread Primer N™ 500 psi 10,000 psi n/a -65°F to
and All Other Sealant (24 hours) +300°F
Metal Fittings
(lower strength)
DO NOT USE THESE PRODUCTS ON OXYGEN OR STRONG OXIDIZERS.
FLUID COMPATIBILITY
1. Refer to Fluid Compatibility Chart – LT-836.
2. Contact your local Industrial Distributor.
3. Call Henkel Technical Information. See back cover for the Henkel
Technical Information number in your area.
1. If necessary, spray adapter threads with Loctite® 7649™ Primer N™.
Allow to dry.
2. Insert bar bed hose stem into hose I.D. with slight twisting motion.
3. Install approp riate hose clamp.
4. Apply a band of L octite® PST® Thread Sealant to male hose stem threads
upon installation or adding accessory device. Tighten snugly.
Note: Loctite® PST® Thread Sealant may attack synthetic rubber tubing.
PST® Band