Page 210 - publication

Master format 3 part specification
www.anvilintl.com 210
SECTION 15050
Basic Mechanical Methods and Materials
3. Incorporate in construction pipe hangers and supports to manufacturer's recommendations utilizing manufacturer's regular production
components, parts and assemblies. Grooved piping installation shall meet ANSI B-31.1 - ANSI B-31.9 standards for horizontal and vertical
pipe support design criteria.
1.5 SUBMITTALS
A. Submit under provisions of Section 01300.
B. [ Product Data ]: Manufacturer's data sheets on each product to be used, including:
1. Preparation instructions and recommendations.
2. Installation methods.
C. Certifcations:
1. Product certifcates signed by manufacturer certifying materials comply with specifed performance characteristics and criteria and physical
requirements. Certifcates shall be furnished only as required by specifc codes, upon request.
D. Selection Samples: For each fnish product specifed, two complete sets of color chips representing manufacturer's full range of available
colors and patterns.
E. Verifcation Samples: For each fnish product specifed, two samples, minimum size 6 inches (150 mm) square, representing actual product,
color, and patterns.
F. Closeout Submittals:
1. Warranty: Warranty documents.
2. Operation and Maintenance Data: Operation and maintenance data for installed products in accordance with Division 1 Closeout
Submittals (Maintenance Data and Operation Data) Section. Include methods for maintaining installed products, and precautions against
cleaning materials and methods detrimental to fnishes and performance.
1.6 QUALITY ASSURANCE
A. Manufacturer Qualifcations:
1. Manufacturing facilities shall be registered to ISO 9001:2000 and assessed to ISO 9000:2000 standard. A copy of the current certifcate
shall be available upon request.
B. Conduct pre-installation meeting to verify project requirements, coordinate with other trades, and establish condition and completeness of
substrate. Review manufacturer's installation instructions and manufacturer's warranty requirements.
1.7 DELIVERY, STORAGE, AND HANDLING
A. Store products in manufacturer's unopened packaging until ready for installation.
B. Store and dispose of solvent-based materials, and materials used with solvent-based materials, in accordance with requirements of local
authorities having jurisdiction.
1.8 PROJECT CONDITIONS
A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results.
Do not install products under environmental conditions outside manufacturer's absolute limits.
1.9 WARRANTY
A. Manufacturer's Warranty: Submit, for Owner's acceptance, manufacturer's standard warranty document executed by authorized company
offcial. Manufacturer's warranty is in addition to, and not a limitation of, other rights. Owner may have under Contract Documents.
Part 2 PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer: Anvil International, which is located at: 110 Corporate Dr. Suite 10 ; Portsmouth, NH 03801; Tel: 603-422-8000;
Fax: 603-422-8033; Email: nwright-ross@anvilintl.com; Web: www.anvilintl.com
B. Substitutions: Not permitted.
C. Requests for substitutions will be considered in accordance with provisions of Section 01600.
2.2 MANUFACTURERS
A. Steel Piping: Black Steel and/or galvanized pipe conforming to ASTM A-53, Grade A or B. Grooving shall conform to Gruvlok published
grooving specifcations.
B. Steel Piping: Black Steel and/or galvanized pipe conforming to ASTM A-135 or A-795. Grooving shall conform to Gruvlok published grooving
specifcations.
GL-2.10