Page 209 - publication

Master format 3 part specification
Introduction
Couplings
Outlets
Fittings
Val
ves &
Accesso
ries
HighPressure
Advanced CopperMethod (IPS)
DI-LOK
®
Nipples
Plain-EndFittings
HDPECouplings
Sock-It
®
Fittings
StainlessSteel Method
Roll
Groovers
Installation& Assembly
SpecialCoatings
DesignServices
Technical
Data
Master Format3 Part Specs.
PictorialIndex
CTS Copper
System
www.anvilintl.com 209
SECTION 15050
Basic Mechanical Methods and Materials
Part 1 general
1.1 SECTION INCLUDES
A. Piping, couplings, fttings and valves for piped building systems.
1.2 RELATED SECTIONS
A. Section 15060 - Hangers and Supports.
B. Section 15300 - Pipes, Valves and Fittings for Fire Protection Systems.
C. Section 15400 - Pipes, Valves and Fittings for Plumbing Systems.
D. Section 15500 - Piping Specialties.
E. Section 15600 - Pipes Valves and Fittings for HVAC Heating and Cooling.
1.3 REFERENCES
A. American Society of Mechanical Engineers (ASME) B31.1 - Power Piping (SI Edition).
B. American Society of Mechanical Engineers (ASME) B31.3 - Chemical Plant and Petroleum Refnery Piping.
C. American Society of Mechanical Engineers (ASME) B31.9 - Building Services Piping.
D. ASTM International (ASTM) A36 - Standard Specifcation for Carbon Structural Steel.
E. ASTM International (ASTM) A47 - Standard Specifcation for Ferritic Malleable Iron Castings.
F. ASTM International (ASTM) A48 - Standard Specifcation for Gray Iron Castings.
G. ASTM International (ASTM) A53 - Standard Specifcation for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless.
H. ASTM International (ASTM) A123 - Standard Specifcation for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products.
I. ASTM International (ASTM) A153 - Specifcation for Zinc Coating (Hot Dip) on Iron & Steel Hardware.
J. ASTM International (ASTM) A240 - Standard Specifcation for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for
Pressure Vessels and for General Applications.
K. ASTM International (ASTM) A387 - Standard Specifcation for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum.
L. ASTM International (ASTM) A515 - Standard Specifcation for Pressure Vessel Plates, Carbon Steel, for Intermediate-and Higher-Temperature Service.
M. ASTM International (ASTM) A536 - Standard Specifcation for Ductile Iron Castings.
N. ASTM International (ASTM) A575 - Standard Specifcation for Steel Bars, Carbon, Merchant Quality, M-Grades.
O. ASTM International (ASTM) A668 - Standard Specifcation for Steel Forgings, Carbon and Alloy, for General Industrial Use.
P. ASTM International (ASTM) A1011 - Standard Specifcation for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy
and High-Strength Low-Alloy with Improved Formability.
Q. ASTM International (ASTM) B633 - Standard Specifcation for Electrodeposited Coatings of Zinc on Iron and Steel.
R. Manufacturers Standardization Society of The Valve and Fittings Industry (MSS) SP-58 Pipe Hangers and Supports - Materials, Design and
Manufacture.
S. Manufacturers Standardization Society of The Valve and Fittings Industry (MSS) SP-69 Pipe Hangers and Supports - Selection and Application.
T. Manufacturers Standardization Society of The Valve and Fittings Industry (MSS) SP-77 Guidelines for Pipe Support Contractual Relationships.
U. Manufacturers Standardization Society of The Valve and Fittings Industry (MSS) SP-89 Pipe Hangers and Supports - Fabrication and
Installation Practices.
V. Manufacturers Standardization Society of The Valve and Fittings Industry (MSS) SP-90 Guidelines on Terminology for Pipe Hangers and Supports.
W. Manufacturers Standardization Society of The Valve and Fittings Industry (MSS) SP-127 Bracing for Piping Systems Seismic-Wind-Dynamic
Design, Selection, Application.
1.4 SYSTEM DESCRIPTION
A. Grooved Mechanical Products: Couplings, fttings, valves and grooved components shall be used as the piping method.
1. Product: Gruvlok as manufactured by Anvil International.
B. System Design Requirements:
1. Grooved products shall meet National and Local Piping and/or Building Codes. Mechanical commercial and industrial piping products
shall have a minimum 300-psi (2.4 MPa) working pressure with 3 to 1 or greater safety working pressure with the exception of plain-end end
fttings, which shall have a minimum of 175-psi (1.2MPa) working pressure.
2. Fire Protection UL/ULC listed and FM approved products shall conform to NFPA working pressures.
GL-2.10