66
2015
Power Transmission Products
Banded
Available in a wide variety of sizes
Continental ContiTech Torque Team® Laminated V-belts are
available in the 5VL belt cross section and in most standard
lengths. The 5VL laminated V-belt is interchangeable with all
standard 5V and 5VX V-belts currently found on these drives.
They can also be cut to a variety of rib widths, depending on
your drive requirements. This ensures a perfectly-matched set
of V-belts that can further enhance drive performance.
5
VL Cross Section View
Applications
Some of the most common drives recommended for
consideration include:
›
Debarkers
›
Gang saws
›
Chip-n-saws
›
Deck saws
›
Cut-off saws
›
Trimmers
›
Chippers
Key features & benefits
›
Narrow profile ribs provide savings through efficiency.
›
Joined construction for problem drives.
›
High horsepower capacity.
›
High-strength Vytacord® tensile members.
›
Laminated construction engineered to slip.
›
Tough fabric backing.
›
Oil, heat, ozone and abrasion resistant.
›
Static conductive.*
*
Drive conditions and service variables in combination with time in
operation can result in a loss of static conductivity. It is recommended
that a conductivity check be added to drive preventive maintenance
programs where belt static conductivity is a requirement.
Reduce downtime and maintenance
Continental ContiTech Torque Team® Laminated V-belts can
withstand the punishment that results from jams in log and
lumber processing applications.
Standard V-belts resist slipping when a jam occurs, causing
excessive heat buildup that can lead to belt failure and costly
downtime. But that won’t happen with Torque Team®
Laminated V-belts on the job.
The special sidewall of Torque Team® Laminated V-belts acts
as a control switch, allowing the belts to slip as needed until the
obstruction is cleared. As a result, the superior wear-resistant
capabilities of Torque Team® Laminated V-belts are maintained,
increasing belt life up to four times longer than standard V-belts.
High strength for long life
Continental ContiTech Torque Team® Laminated V-belts feature
our powerful Vytacord® tensile members. Vytacord® provides
high strength and horsepower ratings, yet serves as a more
forgiving reinforcement that will give under excessive tension
instead of snapping. That means increased belt life.
Part Number: 3/5VL800
3/
3
rib joined construction
5
V
0.62
in. top width – Narrow
profile rib
L
Laminated construction
800
80.0
in. nominal outside length
Torque Team
®
(
Laminated) V-Belts
Solve the toughest sawmill
drive problems
Continental ContiTech Torque Team® Laminated V-belts are
particularly effective when installed on drives that experience
frequent slippage caused by logs and heavy lumber that jam
or impact the equipment.
Sizes
5
VL800
5
VL1000
5
VL1250
5
VL850
5
VL1060
5
VL1320
5
VL900
5
VL1120
5
VL1700
5
VL950
5
VL1180
For longer 5V, as well as 3V and 8V laminated profiles not listed here, contact your
PTP Industrial Distributor.
Overview
Synchronous
Banded
V-Belt
Bushing Hardware
Specialty
Automotive & Truck
General Information