Super Torque Pd
®
Belts
Built for strength and endurance
Super Torque Pd® belts are designed for high-capacity
performance. They are also made of the highest
quality materials.
The tensile members are made from high-strength, stable
fiberglass. They have excellent flex life and are resistant to
elongation. The backing is made of our proprietary compound
technology that is highly heat-resistant and shear-resistant. And
the nylon facing is fabricated to provide low friction interface
between belt and sprocket.
A different positive drive tooth design
Continental ContiTech Super Torque Pd® belt tooth carries
some significant advantages over competitive synchronous
belts. You can run your finger along the bottom of the tooth
and feel the flat surface. When the belt engages the uniquely
designed pulley profile, forces are distributed throughout the
entire belt tooth to disperse critical stresses over more area,
resulting in reduced tooth shear and longer life.
The pulley for our Super Torque Pd® belt has an arch in the
bottom of the grooves that projects up to support the belt
tooth. This support from the pulley is the key dynamic feature
to increased belt capabilities. Together, the pulley and tooth of
the Super Torque Pd® belt extend the possibilities at both ends
of the design spectrum.
Applications
Nearly every conceivable industrial drive application where
precise shaft synchronization is required. Super Torque Pd®
belts can also be used as an alternative to problem V-belt and
chain drives.
›
Milling machines
›
Conveyors
›
Engine accessory drives
›
Debarkers
›
Internal combustion engines
›
Lathes
›
Timers or controllers
›
Shapers
›
Compressors
›
Textile machinery
›
Wood chippers
›
Mixers
Key features & benefits
›
Unique tooth profile for quiet tooth engagement.
›
Improved horsepower capacity over standard HTD® profiles.
›
High-grade compound.
›
Fiberglass tension cords for excellent resistance to shrinkage
and elongation.
›
Oil, heat, ozone and abrasion resistant.
›
Mating sprockets required.
›
Low-maintenance and high-efficiency rating.
To learn more, visit
www.contitech.us
.
All Super Torque Pd® belts are nonstock. Standard factory lead times will
apply. Minimums apply. Contact your PTP Industrial Distributor.
Part Number: 100S4.5M175
100
480
mm pitch length
S
Super Torque Positive Drive® belt
4.5
M
4.5
mm pitch – modified round
tooth profile
175
175
mm pitch length
46
2015
Power Transmission Products
Synchronous
Overview
Synchronous
Banded
V-Belt
Bushing Hardware
Specialty
Automotive & Truck
General Information