50
Fittings
Appendix
Installation & Maintenance
Assemblies
Equipment & Accessories
Fittings
Hoses
Perma-Crimp
™
Fitting Selection
Using The Quick-Find™ Fitting Tables
Continental ContiTech Brand Quick-Find hydraulic hose and fitting catalog makes Perma-Crimp™ fitting selection very easy with a 5 step process.
Step 1 – Choose the Hose Type
The first step in choosing the correct fitting is to first select the hose type. The fitting catalog and product line is broken up into 11 sections. The
11
sections are based on hose type.
Step 2 – Choose the Fitting Description
Once the hose type has been identified, go to the correct section (Sections 1 to 9) and view the available fittings for that particular hose. Within
the content of each section there is a table for each fitting. The Fitting Description at the top of each table describes the fitting. The Fitting
Description consists of the following elements
.
Fitting Description Example
JIC 37˚ Flare (SAE J514)
Female
45
˚ Elbow
Swivel
Thread Description
Gender
Elbow
Swivel or Non-swivel
Reference Thread Descriptions under Fitting Nomenclature at the beginning of this section. The other attributes of the Fitting Description,
including Gender, Elbow and Swivel/Non-swivel, will be found in the fitting table.
Step 3 – Choose Hose I.D. and Thread Size
Choose the correct fitting selected in Step 2 based on the Hose I.D. and Thread Size. In some cases, a fitting may be available in several thread
sizes. As an example, a JIC 37˚ Flare (SAE J514) Female Swivel is available for a hose I.D. of 3/8" and thread sizes 9/16–18 and 3/4–16.
Step 4 – Determine Availability for Hose Type
With the desired fitting identified by Hose I.D. and Thread Size in Step 3, confirm the fitting is compatible for a particular Hose Type by reading to
the right of the product table. A “Y" indicates the fitting is an Ultra-Crimp™, 1-piece fitting and compatible with the hose. A part number would indicate
the fitting is a 2-piece fitting, either Uni-Crimp™ or Dual-Grip™, requiring a ferrule. The ferrule part number is required to make an assembly. A blank in
the compatibility chart would indicate a fitting is not compatible with a particular hose.
Step 5 – Note the Part Number
The fitting part number can now be noted. The part number is found on the left side of the chart. If a ferrule is required, that part number is found
on the right side of the chart under hose compatibility (Step 4).
Hose Family
Section 1 Section 2 Section 3 Section 4 Section 5 Section 6 Section 6A Section 7 Section 8 Section 9
SR1SN
GR7
SR12
SR13
SR3
SR5
DUT
NSFX
Galaxy®
Ferrules
DR1SN TR7
ARC12 ARC13
GR4
DR5
SHR
G4826
SFS
NR7
SR15
SR4
GCX5
SGUN G4867
SR2SN BR7
ARC15
SR6
GHJ
G4890
HR2SN GR8
S4SP
HR6
IG
LR2SN TR8
S4SH SR14A
IGHT
CR2SN NR8
HR4
IGTC
GR16
GR18
IGP
SR16SC
AR16SC
ACP3
XCP3
GR17