28
Hoses
Appendix
Installation & Maintenance
Assemblies
Equipment & Accessories
Fittings
Hoses
Desert® DR5
Application
High temperature, medium
pressure hose for use in
applications including
turbocharger oil lines, tilt cab
cylinder and air brake lines,
transmission coolant and filtration
lines. Compatible with petroleum
oil and phosphate ester–based
hydraulic fluids, air, water, diesel
fuel, petroleum based lubricating
oils and coolants.
Note: Not recommended for
under-the-hood, automotive and
truck fuel line applications. Only
hoses designed and tested to meet
SAE fuel line standards should be
used for these applications
Air Brake Applications: -40ºF to
200
ºF (-40ºC to 93ºC)
General Hot Oil Applications:
-40
ºF to 300ºF (-40ºC to 150ºC)
General Air Applications: -40ºF to
200
ºF (-40ºC to 93ºC)
Water Applications: -40ºF to
212
ºF (-40ºC to 100ºC)
Fitting Reference
All fittings compatible*** with the
DR5 hose family are listed in
Section 7 (starting on page 231)
of the catalog.
Branding
Example: Continental ContiTech
DR5-06 SAE 8 mm (5/16") SAE
100
R5 (DOT FMVSS 106 AII,
J1402 AIR BRAKE) 15.5 MPa
(2250
psi) W.P. GY Made in U.S.A..
SAE 100R5 | Fleet Application
›
Meets or exceeds the performance
requirements of: SAE 100R5; SAE
J1402 Type All, DOT FMVSS 106 Type All
›
High Temperature
›
SAE J1942/U.S. Coast Guard
Note: Sizes 7/8" (-16) and 1
a
" (-20)
do not meet SAE J1402
Type AII & DOT FMVSS 106 Type
AII because these sizes are not
listed in the referenced
specifications.
Inner Tube
CPE
Reinforcement
One braid textile, one braid steel
Cover
Blue impregnated textile braid
Temperature Range
SAE 100R5 Hydraulic
Applications: -40ºF to 302ºF
(-40
ºC to 150ºC)
Descriptive #/
Product #
SAP #
Hose Size ID Hose OD
Max. Working
Pressure
Min. Bend
Radius
Min. Burst
Pressure
Weight USCG
Approved
in.
mm in.
mm psi
MPa in.
mm psi
MPa lbs./ft.
DR5-04
20340705 3/16 4.8 0.52 13.2 3000 20.7 3.0 76 12000 82.7 0.15
H
DR5-05
20341023 1/4
6.4 0.58 14.8 3000 20.7 3.4 86 12000 82.7 0.18
H
DR5-06
20340706 5/16 7.9 0.68 17.1 2250 15.5 4.0 102 9000 62.1 0.22
H
DR5-08
20340707 13/32 10.3 0.77 19.5 2000 13.8 4.5 117 8000 55.2 0.30
H
DR5-10
20340708 1/2
12.7 0.92 23.4 1750 12.1 5.5 140 7000 48.3 0.37
H
DR5-12
20341025 5/8
15.9 1.08 27.4 1500 10.3 6.5 165 6000 41.4 0.45
H
DR5-16
20340709 7/8
22.2 1.24 31.4 800 5.5 7.4 187 3200 22.1 0.47
H
DR5-20
20368015 1
a
28.6 1.50 38.1 625 4.3 9.0 229 2500 17.2 0.58
H
***
Note: Assemblies made with Continental ContiTech’s DR5 hose and Continental ContiTech’ Field Grip® or Uni-Crimp® fittings meet SAE J1402 and DOT FMVSS 571.106
specifications. For high pressure hydraulic applications use the Uni-Crimp® fitting which meets SAE J517 100R5 assembly requirements. Federal law requires registration with
the Department of Transportation for anyone producing air brake hose assemblies.