Hose
A
Tubing
B
Coiled Air Hose
&
Fittings
C
Transportation
D
Fittings
E
Tooling, Equipment
&
Accessories
F
Parker Hannifin Corporation
| Parflex
®
Division | Ravenna, Ohio |
parker.com/pfd
For detailed ordering information, please consult price list or contact Parflex
®
Division.
General Technical
G
G-21
Hose Assembly & Crimping
PTFE Field Attachable
Series
90
1
Fittings –
Inspect each com-
ponent for possible damage. In
addition, inspect socket and
nipple for a through-hole and
threads.
Inspection
Hose –
Visually inspect both
ends of hose for square cut.
Remove any burrs, loose fibers
or wires.
2
Note
When installing sockets on
hose, check hose ends to
determine if wire braid “necks
down” (bends inward). If one
end “necks down” use this end
to slide sockets onto hose.
Slide two sockets over end of
hose with bottom of sockets
back to back. Position sockets
at each end of hose.
Assembly
3
Mount nipple hex in vise. Ensure
nipple end extends beyond vise
jaws sufficiently to allow installa-
tion of hose.
Push hose bore onto nipple to
size tube and to aid in separat-
ing braid before assembling
ferrule onto hose.
Once completed, remove hose
from nipple.
Assembly
CAUTION:
There are several different sections for Hose Assembly
and Crimping. Be sure you are in the section that corresponds to
the fitting series you are using.
See
Table of Contents f
or listing.