Hose
A
Tubing
B
Coiled Air Hose
&
Fittings
C
Transportation
D
Fittings
E
Tooling, Equipment
&
Accessories
F
Parker Hannifin Corporation
| Parflex
®
Division | Ravenna, Ohio |
parker.com/pfd
For detailed ordering information, please consult price list or contact Parflex
®
Division.
General Technical
G
C-13
SG – Steel Spring Guard
Part
Number
Hose
I.D.
inch mm
SG-03 3/16
5
SG-04 1/4
6
SG-06 3/8
10
SG-08 1/2
13
TS – Tube Support
Part
Number
Hose
I.D.
inch mm
TS-03 3/16
5
TS-04 1/4
6
TS-06 3/8
10
TS-08 1/2
13
TS-12 3/4
19
1.
Using a Parker Model 316 cutoff tool, Parflex PHC
hand cutter or other sharp cutter, cut hose squarely
to correct length.
2.
Install SG spring guard on hose as shown. A
guard is not required on size -12 hose.
3.
Slide FN nut on hose and insert TS tube support.
4.
Slide FR plastic ferrule over hose with taper side
toward cut end of hose. Size -12 hose uses a brass
ferrule and requires the hose end to be dipped in
clean water for lubrication.
5.
Push hose into fitting body until bottomed.
Slide nut and ferrule up to fitting body an
tighten nut by hand. With a wrench, tighten
the nut additional 2 to 2-1/2 turns.
6.
Slide spring guard over nut until the lead coil
snaps between the nut and fitting body hex.
How to Assemble Fast-Stor
®
Hose