80
ALUMINAHOT: Specifically designed compound intended for
usage at alumina facilities where the alumina product is at or above
160
°F.
ARMA
®
(
Abrasion Resistant, Mining Application): Designed for
non-coal mining underground applications that meets ASTM
D378-13.2 (old MSHA CFR 30 part 18) flame test standard and
provides good abrasion resistant characteristics.
ARMA
®
II: Designed for non-coal underground mining and
surface applications that meets ASTM D378-13.2 (old MSHA
CFR 30 part 18) flame test standard and offers 40% more abrasion
resistance than ARMA
®
SBR.
ARMA
®
SBR: Designed especially for above-ground prep plants /
power plant applications mining underground and meets ASTM
D378-13.2 (old MSHA CFR 30 part 18) flame test standard.
ARMATOUGH: Designed for the underground coal mining
market, it meets the MSHA CFR part 14 (B.E.L.T.) flame test
standard, is an RMA Grade II compound that is ozone resistant,
and offers 40% more abrasion resistance than SHIELD™.
The compound is designed for the most abusive underground
applications including slope belts.
DEFENDER
®
:
An RMA Grade II rubber compound designed to
provide excellent abrasion resistance, good gouge resistance and
excellent flexing life.
EASYRIDER
®
:
A low rolling resistance steel cord compound for
the pulley side only which is designed to educe the energy cost
by minimizing friction losses. Proven with over 200 miles of belt
in operation, energy consumption is reduced by as much as 20%
compared to standard compounds.
FRAS-SA & FRAS-C: Fire retardant antistatic belting is certified
by the Canadian Department of Energy, Mines and Resources,
Ottawa to CAN/CSA M422M87, Type C, for below surface use
as well as other mining operations. FRAS-SA offers minimum of
40%
better abrasion resistance than FRAS-C compound.
GLOBAL X
®
:
Meets RMA Grade I and DIN X standard. Offers
superior cut, gouge resistance and very good abrasion resistance.
GRADE II: An RMA Grade II rubber compound offered only in
Raider Belting and designed to provide good abrasion resistance,
good gouge resistance and excellent flexing life.
HT NITRILE: An oil resistant compound formulated for
applications demanding higher resistance to heat, oil and abrasion.
It is resistant to temperatures up to 300°F, abrasion flexing,
oxidation and the effect of corrosive atmospheres.
MONSTER HIDE: Monster Hide is a RMA Grade II compound
providing the ultimate in Cut & Gouge protection. It is a durable
addition to an already powerful line-up of Cut & Gouge Compounds
in our product line-up; Monster Hide, GlobalX and Stacker.
MORS: Compounded to resist the terpene content of wood chips
and moderately oily grains. It has good abrasion resistance and
is a good value for handling moderately oily material where fire
resistance is not required.
OMEGA
®
:
Moderate resistance to oil and static conductive.
O.M.E.G.A. meets ASTM D378-13.2 (old MSHA CFR 30 part
18)
flame test standard.
PATHFINDER
®
SUPREME: Designed especially for the grain
industry where oily grains and controlled mineral or vegetable oil
dust suppressive sprays come in contact with the belt.
PATHFINDER
®
PLUS: Designed especially for the grain industry
where oily grains and controlled mineral or vegetable oil dust
suppressive sprays come in contact with the belt. Suitable to -40°F.
SHIELD™: Underground coal mining compound that meets
MSHA CFR 30 part 14 (B.E.L.T.) flame test standard. Virtually
halogen-free self extinguishing compound that produces very
low smoke and toxicity levels. SHIELD-OZ is an above ground
compound that meets MSHA CFR 30 part 14 (B.E.L.T.) flame test
standard.
SOLAR-SHIELD
®
XL 750: An exceptional hot material
compound with superior heat resistance against hardening and
cracking. It is designed to carry hot loads at temperatures up to
750
°F and retain its superior heat resistant qualities.
STACKER
®
:
Premium RMA Grade I Rubber Compound,
designed for superior resistance to cutting, gouging, and abrasion.
SURVIVOR
®
:
Superior abrasion resistance. Ideal for crushed
stone, trap rock, ore, copper, taconite and other abrasive
applications.
6740
A: Compounded for excellent heat and abrasion resistance in
temperature ranges of 350°F for lumpy material and up to 250°F
for hot baking loads.
S T A N D A R D C O M P O U N D S
A b o v e g r o u n d • U n d e r g r o u n d • F l e x s t e e l
®