T-bolt Clamp
Actual bolts tighten T-bolt clamps around hoses
that have an outside diameter of 1 1/4 inches or
more. A T-bolt clamp pulls directly against the
other side of the clamp, allowing more tension
to be placed on it than a worm gear clamp.
Use T-bolt clamps when the material flowing
in a hose could create a significant environmental
problem if spilled. When working around
corrosive materials,
make sure that
all T-bolt clamp
components are
manufactured with
stainless steel.
Selecting and properly using a clamp is just as vital
as selecting the proper hose for the application.
Pressed Fittings
Pressed fittings are used on high-pressure hoses
such as anhydrous ammonia and hydraulic hoses.
They are permanently crimped on both ends of
the hose.
These permanent fittings hold better under
high pressure than clamps. They are installed by
the hose manufacturer or by distribution centers
that have the special tools and knowledge to
install them properly on high-pressure hoses.
Hose crimping machines can help crimp hoses properly.
28