Page 5 - Dixon Bayco Dry Bulk 2013_wm

800.355.1991 Dixon Bayco 2013 3
Dry Bulk Products
ProductsDry Bulk
Products for Blowers
Application: Designed specifically for use on tractor mounted air blowers. The 2182 air relief valves have a
temperature compensated pressure relief setting to accommodate the high temperatures and
dynamic air produced by the blower. If a system blockage were to occur, the valves are designed to
vent to atmosphere once the valve pressure setting is achieved.
Standards: The 2182 valve will relieve at the ordered set pressure at a temperature of 400°F / 204°C. At room
temperature (73°F / 22°C) the 2182 valve will relieve approximately 4 PSI higher than the ordered
set pressure.
The product label shows the set relief pressure at the blower operating temperature, plus the relief
pressure at 73°F / 22°C (for testing purposes). Depending on the blower type, amount of vibration
and operating temperature a difference of observable set pressure may occur.
Example: 2182-18 is set to relieve at 18 PSI while at operating temperature. This same valve will
test at 22 PSI while at room temperature on a test bench. Both set points are listed on the label.
Available with 2" male or female NPT connections.
Materials: Aluminum anodized hard coat body, white food grade silicone poppet and diaphragm
Features & Benefits: •The popular pressure setting for truck mounted blowers is 20 PSI. Valves are available for other
applications with temperature compensated pressure settings of between 3 PSI and 24 PSI.
Customer should request set pressure at time of order.
•High relieving capacity varies between 800 SCFM and 1700 SCFM depending upon the chosen
set pressure. For specific relief rates please refer to our website or contact Dixon.
•Installed cup seal deters tampering
•Anodized aluminum body reduces thread galling
Blower Air Relief Valves
Part # Connection
2182F/xx 2" NPTF air relief valve with special factory setting, see note xx below
2182F/18 2" NPTF air relief valve 18 PSI setting
2182F/20 2" NPTF air relief valve 20 PSI setting
2182/xx 2" NPTM air relief valve with special factory setting, see note xx below
2182/18 2" NPTM air relief valve 18 PSI setting
2182/20 2" NPTM air relief valve 20 PSI setting
• xx refers to choice of pressure setting, request the required pressure setting when ordering.
• See page 22 for air relief testing equipment
2182F 2182