Page 66 - DPL413 Complete Catalog for web_wm

Cam & Groove Fittings
64 DPL413 877.963.4966 • dixonvalve.com
B
Dixon Cam and Groove Gasket Color Codes
Dixon Cam and Groove Gasket Dimensions
'C'
Thickness
'B '
Inside Diameter
'A'
Outside Diameter
• The following are the nominal dimensions for Dixon's elastomeric cam and groove gaskets.
• The ID's of the PTFE envelope gaskets and the PTFE accordion gaskets are 1/16" smaller than the ID's for the elastomeric
gaskets shown below.
• Thickness of PTFE accordion gaskets may vary from chart below.
Size Part # 'A' 'B' 'C'
½" 50-G 1 1-1/32" 11/16" .156"
¾" 75-G 1-3/8" 7/8" .218"
1" 100-G 1-9/16" 1-1/16" .250"
1¼" 125-G 1-15/16" 1-23/64" .250"
1½" 150-G 2-3/16" 1-5/8" .250"
2" 200-G 2-5/8" 2" .250"
2½" 250-G 3-1/8" 2-3/8" .250"
3" 300-G 3-23/32" 3" .250"
4" 400-G 4-7/8" 4" .250"
5" 500-G 5-15/16" 4-7/8" .250"
6" 600-G 7-1/16" 6" .250"
8" 800-G 1 9-5/16" 8-1/8" .343"
Gasket
Code Gasket Material Material
Color
Color code stripes
(appear on the OD of
the gasket or filler )
-BU Buna-N (standard in all metal fittings) black 1 blue
-BF Buna (formulated for fuel service) black 1 green
-VI Viton® black 1 yellow
-THK Extra Thick Buna black 2 blue
-EPR Ethylene Propylene black 1 white
-NE Neoprene black 1 red
-WNE White Neoprene, FDA approved material white none
-WB White Buna N, FDA approved material white blue
-SIL Silicone red none
-TF PTFE (TFE) Envelope with Buna-N filler white / black 1 blue
TFVI PTFE (TFE) Envelope with Viton® filler white / black 1 yellow
TFWB PTFE (TFE) Envelope with White Buna-N filler, FDA approved materials white / white blue
TFEP PTFE (TFE) Envelope with Ethylene Propylene filler white / black 1 white stripe
-TES PTFE (FEP) Encapsulated Silicone core, FDA approved materials translucent / red none
-TEV PTFE (FEP) Encapsulated Viton® core translucent / black none
TFACC PTFE (TFE) Accordion, FDA approved materials white none
1 No interchange standard exists for the ½" and 8" fittings. Generally, these sizes do not interchange with other
manufacturer's products. As such, the gaskets in these sizes are not suitable for use in other manufacturers' couplings.
Since other manufacturer's coding systems vary,
this chart should not be used as a reference in identifying gaskets of unknown origin.