Page 279 - DPL413 Complete Catalog for web_wm

Shank / Water Fittings
277 DPL413 877.963.4966 • dixonvalve.com
F
Steel Dixon Hose Menders
Steel King Hose Menders
• They are not for compressible products such as
air, nitrogen or steam.
• The working pressure may vary with the construction of the
hose, the type of clamping system used and the application.
Consult the factory for recommendations.
• In accordance with the R.M.A. bulletin for oil suction and
discharge hose, a coupled length of hose in any size, should
be tested to 1½ times the working pressure and held for
fifteen minutes without leaking or coupling movement. For
additional information and detailed instruction on testing
procedures, see the Rubber Manufacturers Association
(R.M.A.) handbook.
• They are not for compressible products such as
air, nitrogen or steam.
• The working pressure may vary with the construction of the
hose, the type of clamping system used and the application.
Consult the factory for recommendations.
• In accordance with the R.M.A. bulletin for oil suction and
discharge hose, a coupled length of hose in any size, should
be tested to 1½ times the working pressure and held for
fifteen minutes without leaking or coupling movement. For
additional information and detailed instruction on testing
procedures, see the Rubber Manufacturers Association
(R.M.A.) handbook.
for 1 clamp each end
for 2 clamps each end
Strainer with Spring Loaded Check Valves
Features:
• brass with NBR seat, stainless steel strainer
• soft seat for bubble tight shutoff, spring loaded for fast
seating action
• flow profile designed to minimize head loss
• temperature range: 10°F to 210°F (-10°C to 100°C)
• cracking pressure: 0.50 PSI
• pressure rating: 1½"-2" 400 PSI WOG, 3"-4" 175 PSI WOG
• Underwriters approved
for 2 clamps each end for 1 clamp each end
1 XL series is extra long
Size Zinc Plated Steel Opt
Qty
316 Stainless Steel Opt
Qty Part # Price/E Part # Price/E
1/4" DMA $7.65 200 RDMA $28.00 100
3/8" DMB 7.80 100 RDMB 32.65 100
1/2" DM1 7.75 50 RDM1 28.15 50
5/8" DM5 7.95 50 --- --- ---
3/4" DM6 7.15 50 RDM6 58.00 50
1" DM11 6.60 50 RDM11 61.00 50
1-1/4" DM16 8.80 50 RDM16 64.50 5
1-3/8" DM18 25.55 50 --- --- ---
1-1/2" DM21 9.50 50 RDM21 73.50 50
1-1/2" DMXL21 1 24.15 25 --- --- ---
2" DM26 11.20 50 RDM26 82.70 10
2" DMXL26 1 29.05 25 --- --- ---
2-1/2" DM31 18.30 25 --- --- ---
3" DM36 22.50 20 RDM36 183.30 5
4" DM46 41.40 10 RDM46 216.30 5
5" DM51 130.00 5 --- --- ---
6" DM66 100.55 4 --- --- ---
8" DM86 215.00 1 --- --- ---
10" DM100 335.00 1 --- --- ---
12" DM120 512.30 1 --- --- ---
Size Steel Steel
Part # Price/E Part # Price/E
1/4" KM21 $7.20 --- ---
5/16" KM251 7.20 --- ---
1/2" KM41 8.80 KM42 $11.30
5/8" KM51 11.20 KM52 11.85
3/4" KM61 8.30 KM62 11.10
1" KM81 8.30 KM82 11.75
1-1/4" KM101 7.80 KM102 13.40
1-1/2" KM121 11.10 KM122 20.75
2" --- --- KM162 28.15
1 NSF61 approved
Size Part # Price/E
1½" BVFS20 1 $89.60
2" BVFS25 1 129.00
3" BVFS35 379.50
4" BVFS40 572.50