Page 162 - DPL413 Complete Catalog for web_wm

Air Fittings
160 DPL413 877.963.4966 • dixonvalve.com
E
Flareless Bite Fittings
Tube OD Male NPTF Steel
Part # Price/E
1/8" 1/8" FLC2404-02 $7.85
1/8" 1/4" FLC2404-02-04 7.75
3/16" 1/8" FLC2404-03-02 8.40
1/4" 1/8" FLC2404-04-02 5.75
1/4" 1/4" FLC2404-04 7.45
1/4" 3/8" FLC2404-04-06 8.75
1/4" 1/2" FLC2404-04-08 10.10
5/16" 1/8" FLC2404-05-02 9.25
5/16" 1/4" FLC2404-05-04 10.65
3/8" 1/8" FLC2404-06-02 12.10
3/8" 1/4" FLC2404-06-04 7.70
3/8" 3/8" FLC2404-06 9.60
3/8" 1/2" FLC2404-06-08 9.50
1/2" 1/4" FLC2404-08-04 11.30
1/2" 3/8" FLC2404-08-06 10.80
1/2" 1/2" FLC2404-08 9.45
1/2" 3/4" FLC2404-08-12 17.10
5/8" 3/8" FLC2404-10-06 12.85
5/8" 1/2" FLC2404-10-08 12.50
5/8" 3/4" FLC2404-10-12 33.50
3/4" 1/2" FLC2404-12-08 19.50
3/4" 3/4" FLC2404-12 18.25
3/4" 1" FLC2404-12-16 34.45
1" 3/4" FLC2404-16-12 32.75
1" 1" FLC2404-16 29.95
1" 1-1/4" FLC2404-16-20 45.80
1-1/4" 3/4" FLC2404-20-12 169.65
1-1/4" 1-1/4" FLC2404-20 65.00
1-1/2" 1-1/2" FLC2404-24 72.95
Male Tube x Male NPTF Adapters
Applications:
• chemical, pulp and paper, oil and gas refineries, military, air
compressors and machine tools
• well-suited for a variety of processing and general industry
hydraulic applications
Features:
• Ideally suited for use with tubing having medium to extra
heavy wall thicknesses.
• 3 piece design including only one ferrule eliminates possible
make-up errors that may occur using a twin ferrule tube
fitting.
• Minimal risk of improper assembly as the ferrule visibly bites
into the tubing which allows installer to visually inspect the
bite quality.
• fittings are suitable for sub-zero through elevated
temperature applications
• temperature rating is limited by the material chosen
• pressure ratings are determined by the size (OD) and wall
thickness (inches/mm) of the tubing on which they are to be
installed
Specifications:
• exceeds Military (MIL F18866) and SAE J514 standards
Assembly Instructions:
• cut, de-burr and clean tubing
• pre-set ferrule onto tubing
• Inspect ferrule bite in tubing by disassembling the fitting
and visually inspecting the de-burred end of tube for slight
indentation
• finger tighten nut and then further wrench tighten nut
another 1/3 to 1/2 turn