Page 16 - banneredSheetRubberCatalog2010

KSRCA0208 15
Adhesion: (1) Basically, the adhering, clinging,
bonding or sticking of two material surfaces to
one another, such as rubber to rubber, rubber to
glass, rubber to metal, rubber to wood, rubber
to fabric, rubber to cord, rubber to wire, etc. (2)
Refers to the strength of bond between cured
rubber surfaces or cured rubber surface and a
non-rubber surface.
Aging: To undergo changes to physical
properties with age or lapse of time.
Aging, Air Oven: A means of accelerating the
change in physical properties of rubber
compounds by exposing them to the action of
air at an elevated temperature.
Ambient Temperature: The environment
temperature surrounding the object under
consideration.
Blemish: A mark, deformity, or injury which
impairs the appearance.
Blisters: A raised spot on the surface or a
separation between layers usually forming a
void or air-flled space in the vulcanized article.
(See bubbles, sinks and voids.)
Bloom: A coating or efforescence creating a
discoloration or change in appearance of the
surface of a rubber product caused by the
migration of a liquid or solid to the surface.
Examples: Sulfur Bloom, Wax Bloom. Not to be
confused with dust on the surface from external
sources.
Calendered: Continuously sheeted or plied up
rubber compound or fabric that is frictioned or
coated with rubber compound on a machine
equipped with three or more heavy internally
heated or cooled rolls revolving in opposite
direction.
Checking: Short, shallow cracks on the surface,
generally due to effect of destructive action of
environmental conditions.
C. I. (Cloth-inserted): An abbreviation used to
indicate a sheet of rubber containing one or
more plies of cloth or duck, in which the cloth is
completely covered with rubber.
Cloth Impression: Same as fabric impression.
Coating: A layer of material covering a surface.
Compression Set: The deformation which
remains in rubber after it has been subjected to
and released from a specifc compressive stress
for a defnite period of time at a prescribed
temperature. Compression set measurements
are made for the purpose of evaluating the
creep and stress relaxation properties of rubber.
Cracking: A sharp break or fssure in the
surface. Generally due to excessive strain.
Crazing: A surface effect on rubber articles
characterized by multitudinous minute cracks.
Cure: The act of vulcanization.
Curing Temperature: The temperature at which
the rubber is vulcanized.
Diaphragm Sheet: Sheet (generally fabric-
reinforced rubber) from which fat diaphragms
may be cut.
Die Cut: Shaped articles punched from a sheet
of rubber with a die.
Dielectric Strength: The measure of electric
potential strength of a rubber product. Measure
of its ability as an insulating compound to resist
passage of a disruptive discharge produced by
an electric stress. Measure as volts per mil of
thickness.
Durometer: An instrument for measuring the
hardness of rubber. Measures resistance to the
penetration of an indentor point into the surface
of the rubber.
Durometer Hardness: An arbitrary numerical
value which measures the resistance to
penetration of the indentor point of the
durometer. Value may be taken immediately or
after a very short specifed time.
Elastomer: Macromolecular material that returns
rapidly to approximately the initial dimensions
and shape after substantial deformation by a
weak stress and release of stress.
Elongation: Increase in length expressed
numerically as a fraction or percentage of initial
length.
Filler: (1) A material incorporated into a rubber
compound to increase its bulk. (2) A compound
built into a rubber product to increase its bulk
and/or improve its appearance. (3) Sometimes
erroneously used to mean “flling” in textiles.
Finish, Fabric: Same as impress, fabric.
Finish, Paper: Finish resulting from curing in
contact with paper.
Finish Plate or Platen: Same as plate fnish
(sheet).
Foreign Material: Any extraneous matter such
as wood, paper, metal, sand, dirt or pigment that
should not normally be present in a particular
rubber product or composition.