Page 51 - untitled

ROLLER GUIDE ASSEMBLIES
Spools and blocks are zinc-plated to resist corrosion and
abrasion. Rollers speed handling and reduce wear on
hose. All painted parts are finished with durable abrasion
resistant baked-on powder coat. Delrin bearing surfaces
give a quiet operation with minimum wear and all features
combine to give trouble-free maximum service life.
Hose Reel
Spool Size
Bottom Wind
Roller Bracket
Assembly Model
Number
Top Wind
Roller Bracket
Assembly Model
Number
Multi Position
Roller Bracket
Assembly Model
Number in / mm
Series 30000 - Four Way Rollers
6” 153 S600693-1 S600692-1 S600533-1
12” 305 S600693-2 S600692-2 S600533-2
18” 485 S600693-3 S600692-3 S600533-3
22” 559 S600693-4 S600692-4 S600533-4
28” 712 S600693-5 S600692-5 S600533-5
Series 30000 - Three Way Rollers
6” 153 S602108-1 S602109-1
12” 305 S602108-2 S602109-2
18” 485 S602108-3 S602109-3
22” 559 S602108-4 S602109-4
28” 712 S602108-5 S602109-5
Bottom wind and top wind may be used with all models except bevel crank.
Multi position may not be used on models with a chain guard or 37000
series reels.
Three-way rollers Four- way rollers
(multi-position)
ROLLER HOSE GUIDE ASSEMBLIES
MODEL
NUMBER
ACCOMMODATES WEIGHT DIMENSION
HOSE O.D. A B C D E F
in (mm) lbs / kg in / mm in / mm in / mm in / mm in / mm in / mm
HR 1057 .603 (16) - .906 (23) .25 .12 0.875 22.3 3.125 79.4 3.125 79.4 1.6875 29.8 1.6875 29.8 N/A
HR 1059 .250 (6.4) - .625 (15.9) .25 .12 0.625 15.9 3.125 79.4 3.125 79.4 1.6875 29.8 1.6875 29.8 N/A
HR 1145 .603 (16) - .906 (23) .34 .15 2 50.8 1 25.4 3.75 95.3 2.75 69.9 2.125 54.1 3.125 79.4
S270109 .900 (23) - 2.00 (50.8) 5.39 2.44 5.25 133.4 2.375 60.4 12 305 8 204 5 127 10.5 267
600168 .900 (23) - 1.375 (34.9) .75 .34 1.75 44.5 2.0625 27 5.125 130 5.125 130 4 102 4 102
These four-way roller guide assemblies are for use
with reels on cabinet door openings and for similar
locations where sharp edges may cut or damage
the hose, four-way design permits pulling or
retracting hose at any angle. Model S270109 has
nylon rollers mounted on an 11 gauge steel frame
with pre-drilled mounting holes.
Note: A hose bumper should be used with the four-way roller hose guide
assemblies to prevent damage to rollers and nozzles. See chart on page 51.
HR 1059
HR 1145
600168
S600808
Operating switch
600848-3
Top hose roller guide
600226-3
Bottom hose roller guide
600518
Chain guard
600812
Battery box (Battery not
included)
600814
Battery cable connector
600829-100
Hose, 1” I.D. X 100’
601044-150
Hose, 3/4” I.D. X 150’
600964
Inlet hose, 1” I.D. X 10’
ADDITIONAL SERIES 30000 ACCESSORIES
ADDITIONAL ACCESSORIES
340° PIVOT BASE
Aligns reel to the direction of
hose or cord run. May be mount-
ed with reel upright or hanging.
Weight 10 lbs. (5kg). Note: Use
if hoses or cords are pulled at
more than 45°.
FOR REEL SERIES PART #
RT / 4000 / 5000 /
5005 / 7000
600608
80000 / D80000 /
30006
600801
30012 600801-12
WALL-MOUNTED UNIVERSAL
SWING BRACKET
Bracket will pivot approximately
180°. All steel construction with a
durable baked on powder coat
finish. Weight 6 lbs (3kg).
Note: Use if hoses or cords are
pulled at more than 45°.
Note: Not for overhead mounting.
FOR REEL SERIES PART #
RT 600992
4000 / 5000 600993
RT / 4000 / 5000 /
5005 / 7000
600626
80000 / D80000 600980
TOP MOUNTING CHANNELS and BEAM CLAMPS
600370 Top channel and beam clamps -for one reel
600295 Top channel and beam clamps -for two reels
For mounting Series 4000 through 7000 reels to I-beam or overhead
support. Mounting channels can be mounted end to end to mount
three or more reels.
600230 Adaptor Assembly
Channels are designed to accommodate Series 7000 reels. Adaptor
#600230 permits the mounting of Reelcraft Series RT, 4000, 5000,
5005 and electric cord reels on mounting channel. Used with top
channels and beam clamps only.
600992
600626
North America: 800-444-3134 Asia: +63 (45) 599-3721
Europe: +44 (0) 1536 406999 Latin America: 260-489-1685
www.reelcraft .com Quick Ship Item
Wind Things Up With Reelcraft TM
49