Page 451 - 4300 Catalog Cover.pdf

SEO Version

Page 450

Page 452

4300 Catalog

Assembly / Installation

Parker Hannifin Corporation

Tube Fittings Division

Columbus, Ohio

T41

Assembly Heights and

Clearance

There are dimensions given on the product drawings in the

individual product and reference sections that can be used for

calculating assembly heights and minimum clearances.

For example:

Take a C6LO (90° swivel elbow) and connect it to a

F5OLO (straight thread connector) which is threaded

into an SAE straight thread port. The centerline distance

above the manifold to the connecting tube may be calcu-

lated as

HH + AAA

from product drawings and reference

section.

Fig. T65 — Assembly dimensions

The minimum clearance required between the manifold surface

and the top of the fitting may be calculated by adding

for

the connector to

AAA

for the 90° elbow to

which is half the

distance across the hex points on the tube nut.The

dimension

can be calculated by multiplying the nut hex size by 1.17.

Assembly Heights and Clearance