Page 264 - untitled

Parker Hannifin Corporation
Parflex Division
Ravenna, Ohio
258
Hydraulic &PneumaticHose & Fit.
PTFEHose &Fittings
Thermoplastic
Tubing
Coiled Air Hose,
Fittings
& Accessories
Truck (Fleet)
Products
Tooling &Equipment
Hose
Accessories
Technical &
Design
Information
Approvals &
Guides
Alphanumeric
Index
Hose Type Size Ftg.Ser.
Crimp
Die
80C-*83C-
Min.
(in)
Max.
(in)
Min.
(mm)
Max.
(mm)
D6 12 HY P1220 1.210 1.230 30.7 31.3
D6 16 HY P1525 1.515 1.535 38.4 39.0
H6 04 HY P0550 0.540 0.560 13.7 14.3
H6 05 HY P0635 0.625 0.645 15.8 16.4
H6 06 HY P0705 0.695 0.715 17.6 18.2
H6 08 HY P0845 0.835 0.855 21.2 21.8
H6 10 HY P1045 1.035 1.055 26.2 26.8
H6 12 HY P1195 1.185 1.205 30.1 30.7
HFS/HR1C 04 HY P0580 0.570 0.590 14.4 15.0
HFS 05 HY P0665 0.655 0.675 16.6 17.2
HFS/HR1C 06 HY P0740 0.730 0.750 18.5 19.1
HFS/HR1C 08 HY P0845 0.835 0.855 21.2 21.8
HFS 12 HY P1130 1.120 1.140 28.4 29.0
HFS 16 HY P1395 1.385 1.405 35.1 35.7
HFS2/HR2C 04 HY P0625 0.615 0.635 15.6 16.2
HFS2/HR2C 06 HY P0740 0.730 0.750 18.5 19.1
HFS2/HR2C 08 HY P0870 0.860 0.880 21.8 22.4
HFS2/HR2C 10 HY P1015 1.005 1.025 25.5 26.1
HFS2/HR2C 12 HY P1150 1.140 1.160 28.9 29.5
HFS2/HR2C 16 HY P1450 1.440 1.460 36.5 37.1
HLB 2 CY 80C-P0368 0.361 0.375 9.2 9.5
HLB 3 CY 80C-P0505 0.495 0.515 12.6 13.1
R6 04 HY P0570 0.560 0.580 14.2 14.8
R6 06 HY P0740 0.730 0.750 18.5 19.1
R6 08 HY P0870 0.860 0.880 21.8 22.4
R6 10 HY P1100 1.090 1.110 27.6 28.2
Note: ** Black Die Ring must be used with these dies
Note: * Silver Die Ring
Crimp Specification & Tool Selection Chart
Hose Type Size Ftg.Ser.
Crimp
Die
80C-*83C-
Min.
(in)
Max.
(in)
Min.
(mm)
Max.
(mm)
R6 12 HY P1245 1.235 1.255 31.3 31.9
R6 16 43 M1600 1.590 1.610 40.3 40.9
S5 08 55 P08 0.840 0.860 21.3 21.9
S5 10 58 P10S 1.060 1.080 26.9 27.5
S6 12 58 P12H 1.150 1.170 29.2 29.8
S6 16 58 P16J 1.450 1.470 36.8 37.4
S6 24 71 - 2.290 2.310 58.1 58.7
S6 12 HY P12H 1.150 1.170 29.2 29.8
S6 16 HY P1450 1.440 1.460 36.5 37.1
S6 20 SQ T24* 1.840 1.860 46.7 47.3
S9 12 58 P12H 1.150 1.170 29.2 29.8
S9 16 58 P16J 1.450 1.470 36.8 37.4
S9 12 HY P12H 1.150 1.170 29.2 29.8
S9 16 HY P1490 1.480 1.500 37.5 38.1
HTB 04 BW P0745* 0.735 0.755 18.6 19.2
HTB 06 43 A06** 0.865 0.885 21.9 22.5
HTB 08 43 A08** 0.985 1.005 25.0 25.6
HTB 10 43 A10** 1.100 1.120 27.9 28.5
HTB 12 43 A12** 1.285 1.305 32.6 33.2
HTB 16 43 A16** 1.630 1.650 41.4 42.0
M8 06 43 M0850 0.840 0.860 21.3 21.9
M8 08 43 M1010 1.000 1.020 25.4 26.0
M8 10 43 M1170 1.160 1.180 29.4 30.0
Notes:
1. Crimp diameter roundness shall not vary by more than .010".
2. Crimp diameters are measured in the center to the crimp area.
3. Use only Silver Die Ring when crimping Parflex hose fittings except where noted above.
4. Parflex Division reserves the right to alter crimp specifications.