Page 60 - ParkerMULTITUBE

57
Parker Hannifn Corporation
Parfex Division
Ravenna, OH
Process Control & Analyzer Systems Catalog Number 4200-M-2
4031-0001 Electrical Connection Kit
for CL and CH Series Constant
Wattage Temptrace
Description: Parker electrical connection kits are universal all-in-
one connection kits for making the electrical connections (input
power, splice, input power splice, and termination) for Parker
electric trace tubing bundles. The kits contain all the necessary
components and hardware to make one input connection, one
splice connection or one input power splice connection as well as
two termination connections. The connection kits are designed for
use in ordinary locations and Class I, Division 2, Groups B, C, and
D; Class II, Division 2, Groups F and G; Class III, Divisions 1 and 2
hazardous locations.
Each Kit contains:
1 Connection Box
1 Connection Box Gasket
1 Connection Box Cover
1 Mounting Bracket
1 3/4" Locknut
1 3/4" Pipe Plug
1 "Electric Trace" caution sticker
1 2.8 oz Black RTV Sealant
1 Bracket Assembly
2 Connector unions
2 Heating cable grommets
2 Plastic cable ties
2 Non-insulated butt splice (12-10 AWG)
3 Non-insulated butt splice (16-14 AWG)
2 Heater termination boots
1 Roll 3/4" wide temperature tape
Approvals:
FM – Factory Mutual Approved
Ordinary Locations
Hazardous (Classifed) Locations
Class I, Division 2, Groups B, C and D
Class II, Division 2, Groups F and G
Class III, Division 1 and 2
Ground Fault Equipment Protection Devices (GFEPDs):
The IEEE standard (515-1989) for heating cables requires the
use of GFEPDs with a nominal 30 milliampere trip level for
“piping systems in classifed ares, those areas requiring a high
degree of maintenance, or which may be exposed to physical
abuse or corrosive atmospheres.”
Refer to Section G for detailed installation instructions.
Assembled Input Power
Connection Kit
Assembled Termination
Connection Kit
Assembled Input Power and
Splice Connection Kit
r tr l l r t