Page 17 - ParkerMULTITUBE

14
Parker Hannifn Corporation
Parfex Division
Ravenna, OH
Catalog Number 4200-M-2 Chemical Processing and Refneries
Steam Trace SK-612 or SK-630
RTV or ESB
Temptube
Steam Supply
®
PTFT
RTV or ESB
Temptube
Condensate Return
®
SK-612, SK-630
PTFT
SK-612 or SK-630
or SK-696
Steam Trace Accessory Selections
Heat Shrinkable Boots (HSBs)
Parker heat shrink boots (HSB) are designed to
prevent moisture from entering the ends of Parker
Temptrace™ bundles. The dash number represents
the number of breakouts in each boot. The boots can
be used on 1/4", 3/8", or 1/2" tubes, or as a seal for
the heating cable.
HSB-1 HSB-2
End Sealant
Description: Parker end sealant is a paste material
which becomes a tough, rubbery seal upon exposure
to air. Total curing takes about 24 hours, at which time
it has excellent resistance to weather, ozone, oil, many
chemicals and extreme temperatures “-75°F (-60°C) to
+400°F (204.4°C). High temperature sealant to 500°F
(260°C) available.
To order: Specify Parker room temperature vulcanizing
(RTV) end sealant part numbers:
Important: All Parker steam products must have sealed
ends to prevent contamination of insulation. Parker
product ends are sealed at the factory and it is important
that these seals be maintained during storage and that
they are sealed upon installation. We will not assume
liability for any corrosion or damage to the product
caused by such contamination.
RTV-103BLK
10.3 – 10.1 oz. cartridge,
400°F (204.4°C) rated
RTV-106RED – 2.8 oz.
tube, high temperature
500°F (260°C)
RTV-103BLK
– 2.8 oz. tube, 400°F
(204.4°C) rated
PTFT Feed–Through Seal Kits
Selected specifcally for use with Parker Temptube®
and Temptrace™ bundles. PTFT kits provide an
excellent method in which to Install Parker Temptube®
and Temptrace™ bundles in instrument enclosures
and cabinets.
PTFT – 1.50 PTFT – 2.00