Page 218 - Cat4800-Oct2011

204

Parker Industrial Hose Customer Service

866 810 HOSE (4673) 800 242 HOSE (4673)

Strongsville, OH

South Gate, CA

Eastern USA

Western USA

www.safehose.com

e-mail: indhose@parker.com

Petroleum – LPG

LP Gas Hose

Static Wire

ISO 2928-1986 (E)

Series SS106

Series SS106 is a large diameter, heavy duty liquefed petroleum gas (LPG)/propane transfer

hose for large volume bulk loading/unloading. Te hose construction incorporates multiple

plies of textile reinforcement for fexibility and kink resistance, and the perforated cover is

resistant to abrasion, oil and ozone. Te hose meets ISO 2928-1986 (E) requirements.

NOTES:

• Not for applications requiring Underwriters Laboratories (UL) or Canadian Gas

Association (CGA) performance or listing.

• Refer to the Safety and Technical section of this catalog for safety, handling and

use information.

Series SS106 and Natural Gas:

Te molecules of natural gas are small, enhancing their

ability to permeate through standard rubber hose constructions. Te permeation process is

more rapid as the working pressure increases, and natural gas accumulates with potentially

dangerous consequences. Series SS106 may be used for natural gas service, but ONLY

under ALL of the following conditions:

• Te application must be in a well-ventilated environment: Outdoors, or indoors with

signifcant continuous air movement.

• Series SS106 is not to replace fxed/rigid pipe where that material is more appropriate

due to reduced permeation and overall strength and durability. Use rigid pipe, non-

permeable tubing or hose with barrier constructions to convey natural gas whenever

possible.

Series SS106 and Compressed Natural Gas (CNG):

Series SS106 is not to be used for any

CNG application, including fuel dispensing, on-board vehicle fuel lines, or fuel transfer.

Series SS106 and Anhydrous Ammonia (NH

3

):

Series SS106 is not for use with anhydrous

ammonia.

Tube:

Black nitrile

Reinforcement:

Multiple textile plies with static wire

Cover:

Black nitrile; perforated wrapped fnish

Temp. Range:

-40°F to +180°F (-40°C to +82°C) (The hose construction is capable of

this rating, but LP Gas should NEVER be conveyed over 140°F/60°C)

Brand Method:

Embossed

Brand Example:

PARKER SERIES SS106 (ID) LPG HOSE ISO 2928-1986 (E) 20 BAR 350

PSI WP (DATE CODE) MADE IN USA

Design Factor:

5:1

Industry Standards:

ISO 2928-1986 (E)

Applications:

• LP gas/propane

• Bulk loading/unloading; in-plant tank transfer

Vacuum:

Not recommended

Packaging:

Coils

(Continued on the following page)

WARNING!

Use only with couplings qualifed by Parker. Do not use with male swivel couplings or other couplings containing o-rings,

which may dry out, crack and fail over time.

!