Page 264 - Catalog4400.pdf
SEO Version
B-172
Hose Products Division
Parker Hannifn Corporation
Wickliffe, Ohio
30 Series Fittings
Catalog 4400 US
Use with
hose.
30 Series
Hose Assembly Instructions
1. Identify over all length (OAL) of hose assembly and the cut off
allowance (COA) length of ftting(s) on hose ends by use of
the ftting data table. Properly measure, mark and cut hose to
desired length using fne tooth hacksaw or a cutoff machine.
Dip hose end into Hoze-Oil
or heavy oil.
2. Place socket in vice and screw in hose counter-clockwise until
hose bottoms. Back hose out 1/2 turn.
3. Dip hose end of nipple into Hoze-Oil or other heavy oil up
to the hex. When assembling fttings of 316 stainless steel
lubricate the threads of both the socket and nipple with Dow
Corning Molykote G-n or equivalent metal assembly lubricant.
4. Screw nipple assembly into socket using wrench on nipple
hex until nipple hex shoulders against socket.
Note:
Disassemble in reverse order.
IF YOU HAVE QUESTIONS CONCERNING THE PRODUCTS
OR APPLICATION OF THE PRODUCTS CONTAINED IN THIS
CATALOG, PLEASE CALL: PARKER HOSE PRODUCTS
DIVISION TECHNICAL SERVICES DEPARTMENT
PHONE: 440 / 943-5700
FAX: 440 / 943-3129
Assembly Instructions
1
2
3
4
Powered by FlippingBook Publisher