Page 174 - ParkerBrassCatalog2010

Parker Hannifn Corporation
Parker Brass Products Division
Otsego, Michigan
E4
E
Advantages
This economical ftting resists mechanical pullout. Can be assembled
and disassembled repeatedly. Manufactured from CA 360, CA 345 or
CA 377 brass.
Specifcations
Listed with Underwriter’s Laboratories for fammable liquid, marine,
refrigeration and gas applications. Meets functional requirements of
SAE J512 and J513. Refer to list of UL listed fttings on page M10 for
specifc confgurations.
Applications
Use with copper, brass, aluminum and welded steel hydraulic tubing
that can be fared. Manufactured especially for hard-to-hold liquids and
gases.
Working Pressure Ranges
Temperature and type of tubing used are important factors. However,
the following table is a good guide for proper selection. Temperature
73°F with copper tubing:
PSI Tube Tube
O.D. (in.) Wall (in.)
2800 1/8 .030
1900 3/16 .030
1400 1/4 .030
1200 5/16 .032
1000 3/8 .032
750 1/2 .032
650 5/8 .035
550 3/4 .035
450 7/8 .035
Temperature Ranges
From -65° to +250°F.
Vibration
Short nut may be used when vibration is minimal. The long nut offers
additional vibration capacity.
Assembly Instructions
1. Cut tubing squarely and clean tube end thoroughly to remove burrs.
2. Place nut onto tube. Place threaded end of nut toward end of tube.
3. Flare tube end with faring tool to provide 45° fare.
4. Clamp tube fare between nut and nose of ftting body by screwing
nut on fnger-tight. Tighten with a wrench an additional 1/4 to 1/2 turn
past fnger tight for a metal-to-metal seal.
Flare fttings are easy to disassemble and may be reassembled
repeatedly, for a leak-proof connection.
SAE 45° Flared Fittings
Order
By part number and name. SAE 45° fared bodies and nuts are
separate items. Both numbers must be indicated when ordered.
Nomenclature
Part numbers are constructed from symbols that identify the style
and size of the ftting. The frst series of numbers and letters identifes
the style and type ftting. The second series of numbers describes
the size.
Sizes
Tube sizes are determined by the numbers of sixteenths of an inch in
the tube O.D.
Special Fittings
Fitting confgurations and/or sizes other than those shown in the
catalog can be furnished. It is suggested that a print or sketch be
submitted with the inquiry. Special UL stamped fttings are available.
Please consult price list.
Pricing
Only items priced in current supplementary price list PL3501 are
carried in stock. Price and delivery for non-stock items furnished on
request for specifed quantity.
Example: 1 49 F –6 –4
Forging (1)
Extrusion (2)
Flare to external pipe, 90° elbow
Flare fitting
3/8" (6/16) tube O.D. size
1/4" (4/16) pipe size