Page 151 - ParkerBrassCatalog2010

Parker Hannifn Corporation
Parker Brass Products Division
Otsego, Michigan
D15
Catalog 3501E TrueSeal™ Thermoplastic Push-In Fittings
D
All sizes in inches
NORYL ® is a registered trademark of the General Electric Co.
Parker TrueSeal™ Cartridge Inserts:
Allow you to machine or mold a tube connection into your equip-
ment or components. By using cartridge inserts, you will reduce
your material and assembly costs, reduce potential leak paths, and
give your equipment a new, clean profle by eliminating the need for
threaded connections. TSC Cartridge Inserts consist of 1 o-ring, 1
cartridge, and 1 collet.
*Cartridge inserts are rated at 300 psi in ports dimensioned as
above and having Noryl as the receiving material. Other materials
may have different ratings and require different port dimensions.
Consult the Brass Products Division when using polypropylene,
unflled polypropylene, ABS or Nylon.
Assembly Instructions:
Step 1—Machine or mold the receiving orifce as per the above
dimensions.
Step 2—Place the cartridge insert squarely onto the prepared port
opening making sure that the barbs of the cartridge are going into
the hole and the lettering on the face of the cartridge is visible.
Step 3—Using a rubber mallet or press, insert the cartridge into
the frst gland orifce until its face is fush with the top surface of the
port.
Step 4—Insert the o-ring into the cartridge and seat it evenly into
the second gland orifce.
Step 5—Insert the collet into the cartridge opening.
Step 6—Insert tubing.
DØ
.03 RAD
E
F
G
32
AØ BØ CØ
H Minimum
Port Spacing
TSC - Cartridge Insert
Part
Number
with
EPDM
Seal
Nom.
Tube
O.D.
A*
Diameter
±002
B
Diameter
±003
C
Diameter
±003
D
Diameter
Minimum
E
Depth
±002
F
Depth
±002
G
Depth
±002
H*
Centerline
of
Ports
Minimum
ATSC4-MG 1/4 .528 .421 .260 .19 .230 .435 .600 .670
ATSC6-MG 3/8 .632 .545 .385 .31 .280 .455 .705 .790
ATSC8-MG 1/2 .774 .668 .510 .41 .315 .510 .810 1.250