Page 11 - ParkerBrassCatalog2010

A5
A
Parker Hannifn Corporation
Parker Brass Products Division
Otsego, Michigan
Compression Fittings
Advantages
No faring, soldering or other preparation of tubing necessary to
assemble. This economical ftting is readily available in a broad
selection of styles. Manufactured from CA 360, CA 345 or
CA 377 brass.
Specifcations
Listed with Underwriter’s Laboratories for fammable liquid.
Compression fttings meet functional requirements of SAE J-512.
Refer to list of UL listed fttings on page M10 for specifc confgurations.
Applications
Use with annealed copper, aluminum, and Parfex thermoplastic tubing.
Not recommended for steel tubing. Manufactured for low and medium
pressure tubing connection work where excessive vibration or tube
movement is not involved.
Working Pressure Ranges
Temperature and type of tubing
used are important factors.
However, the following table
is a good guide for proper
selection. Temperature 73°F.
For thermoplastic tubing, see
manufacturers recommendation
for pressure range.
Temperature Ranges
From -65° to +250°F with soft
metal tubing. For thermoplastic
tubing, see manufacturers
recommendation for tubing
temperature range.
Vibration
Fair resistance to vibration or tube movement, depending on
applications involved. Use long nut for additional resistance to vibration.
Assembly Instructions
1. Slide nut, then sleeve onto tubing. The thread end of the nut must
face out.
2. Insert the tube into the ftting. Be sure the tube is bottomed on the
ftting shoulder.
3. Assemble nut to body, and tighten “hand-tight”. Then follow the
number of wrench turns as indicated in the following table.
Order
By part number and name.
Nomenclature
Part numbers are constructed from symbols that identify the style and
size of the ftting. The frst series of numbers and letters identifes the
style and type ftting. The second series of numbers describes the size.
Example: 2 69 C –6 –4
Extrusion (2)
Forging (1)
Male Elbow
Compression
3/8" (6/16) Tube O.D.
1/4" (4/16) Pipe Thread
ISP .D.OebuT
(Inches)
llaWebuT
(Inches)
004 8/1 030.
004 61/3 030.
003 4/1 030.
003 61/5 230.
002 8/3 230.
002 2/1 230.
051 8/5 530.
001 4/3 530.
57 8/7 530.
gnittiF
Size
ebuT
Size
morflaesotderiuqersnruT
hand-tight
C06
with soft
metal tubing
htiwTP06
thermoplastic
tubing
2 8/1 4/1-1 ––
3 61/3 4/1-1 ––
4 4/1 4/1-1 2
5 61/5 4/1-1 2
6 8/3 4/1-2 2
8 2/1 4/1-2 2
01 8/5 4/1-2 2
21 4/3 4/1-2 2
41 8/7 4/1-2 ––
Note: To order compression assemblies with long nuts, add the letter “L”
after the letter “C”. Example: 62C-4 with short nut,62CL-4 with long nut
Sizes
Tube sizes are determined by the numbers of sixteenths of an inch in
the tube O.D.
Special Fittings
Fitting confgurations and/or sizes other than those shown in the
catalog can be furnished. It is suggested that a print or sketch be
submitted with the inquiry. Special UL stamped fttings are available.
Please consult price list.
Pricing
Only items priced in current supplementary price list PL3501 are
carried in stock. Price and delivery for non-stock items furnished on
request for specifed quantity.