Page 16 - NOSHOK Product Guide

THERMOMETERS
NOSHOK 800 SERIES PLATINUM
RESISTANCE TEMPERATURE
TRANSMITTERS use the proven
reliability and stability of the
platinum 100 ohm sensor to
provide unbeatable performance
at an economical price.
SPECIFICATIONS
Output Signals: 4mA to 20mA,
2-wire; 0Vdc to 10Vdc, 3-wire
Ranges: STD ranges from -40 ºF to
1000 ºF
Accuracy: Class B (±0.5% Full
Scale)
Power Supply: 10Vdc to 30Vdc for
Current Output 14Vdc to 30Vdc for
Voltage Output
Housing Material: 316SS
Wetted Material: 316SS
Stem Lengths: From 2.5″ to 12″ –
Stock
Process Connection: 1/2″ NPT
male
CE compliant to EMC norm
EN 61326: 1997/A1 1998
RFI, EMI and ESD IP65, NEMA 4X
(IEC 529)
NOSHOK 100 SERIES
INDUSTRIAL TYPE BIMETAL
THERMOMETERS are a high
quality, low cost thermometer
designed for limited space
applications or where a weather
resistant, tamper proof case is
required. The bimetal element is
an extremely responsive tem
perature sensing helix which has
been carefully sized and tested,
heat treated and aged to relieve
inherent stresses and insure
continued accuracy.
SPECIFICATIONS
SIZE: 2 inch and 3 inch sizes
CASE: 304SS
BEZEL: 304SS
LENS: 2 inch – Convex glass; 3 inch
– Instrument glass
STEM: 304SS; 2.5 inch to 24 inch
lengths available
CONNECTION: center back – STD;
2 inch – 1/4″ NPT; 3 inch – 1/2″
NPT, 3/8″ NPT - Optional
ACCURACY: 2 inch - ±1% Full
Scale; 3 inch - ±2% -1% -2% Full
Scale
RANGES: -100 to 150 ºF through
200 to 1000 ºF; Single and Dual
Scales available
NOSHOK 300 SERIES
INSTRUMENT TYPE BIMETAL
THERMOMETERS are the highest
quality thermometers available in
today’s market. They feature a
sturdy, corrosion resistant 304SS
case and bezel which provides a
hermetic seal to prevent crystal
fogging and damage caused by
moisture. A slotted hex
adjustment head offers field
calibration for maximum
accuracy at a selected range.
SPECIFICATIONS
SIZE: 3 inch and 5 inch sizes
CASE: 304SS
BEZEL: Electropolished 304SS
LENS: Instrument glass
STEM: 304SS; 2.5 inch to 24 inch
lengths available
CONNECTION LOCATION:
center back; bottom connection;
adjustable angle connection
CONNECTION SIZE: 1/2″NPT –
STD; 1/4″ NPT & 3/8″ NPT –
Optional
ACCURACY: ±1% Full Scale
RANGES: -100 to 150 ºF through
200 to 1000 ºF; Single and Dual
Scales available
A silicone liquid filled option is
available for applications where
severe vibration may be a factor.
NOSHOK VAPOR or GAS ACTU-
ATED REMOTE THERMOMETERS
operate using a temperature actu-
ated liquid in the sensing element
and a highly accurate, high quality
pressure gauge to indicate media
temperature. As the media tem-
perature increases the capillary
fill fluid vaporizes, causing an
increase of pressure within the
bourdon tube, and activates the
movement and pointer for proper
indication. Dial scale graduations
are non linear, therefore, the
highest degree of accuracy and
readability is found in the upper
half of the scale.
SPECIFICATIONS
SIZES: 2, 2 1/2, 3 1/2, 4 and 4 1/2
inch sizes
CASE MATERIAL: Brass or stainless
steel (dry or liquid filled)
CONNECTION: Bottom connection;
back connection; lower back
connection
OPTIONAL FILL FLUIDS: Glycerine,
glycerine-H2OD and
silicone
MOUNTING OPTIONS: Front or rear
flange, bezel & U-clamp
RANGES: -40 to 60 ºF/C through 50
to 400 ºF/C
CAPILLARY LENGTH &
MATERIAL: Copper & SS; 5 foot to
40 foot
BULB MATERIAL &
DIMENSIONS: Copper or SS; 2
5/8″x 7/16″ through 7″x 12″
NOSHOK THERMOWELLS are
recommended whenever the
process being measured may be
under pressure, is corrosive,
abrasive or may be at a high
velocity. They are also recom-
mended as protection to the
operator. The correct thermowell
will reduce the possibility of
damage to the temperature
instrument and allows an
instrument to be removed and
replaced without shutting down
and possibly draining the process.
Standard thermowells are
supplied with 1/2″ NPSM
instrument connection. The female
thread will accept the 1/2″ NPT
male thread without galling or
seizing.
SPECIFICATIONS
MATERIALS:
Brass, 304SS or 316SS
INSERTION:
1 5/8 inch to 22 inch sizes
BORE DEPTH:
2 1/2 inch to 24 inch sizes
PROCESS CONNECTION: 3/4 inch –
STD; Others available upon request
800 SERIES BIMETAL THERMOMETERS REMOTE THERMOMETERS THERMOWELLS
WARRANTY:
800 Series: Three Years†
WARRANTY:
100 Series: One Year†
WARRANTY:
300 Series: Five Years†
† For further warranty information please consult your specific product catalogs. 16